RC India

hi
i bought avionic rcb 7x Tx i installed all softwares but usb is not rcognized by pc and laptop i tried in 3 different pcs and laptop
but not able to connect wireless simulator in device manager unknown device displayed
kindly help

Abhi, plz see the videos displayed at the radio web page from RC bazar.

Hey first bind ur receiver to tx. Install all softwares including expansion packs. Switch on ur radio, put it in plane mode and not heli mode, leaving everything else as default.  Connect usb single to receiver and follow the wire placement correctly,  refer the manual. Now connect usb to pc and run the program go to autodetect, then calibrate and select controller interface. I have done this after initial failed attempts. Have been using it on pc and my MacBook also.

Let us know the progress.

still not able to connect i followed all the procedures to connect  but the usb is not recognized
plz help

Which os are you using.. Try it in win xp or lower... once
run run in compatibility mode under win xp

sorry if you are using windows 95

Sometime brute force works. I was getting the same error from my PC. I am on a win 8 machine. All I did was keep removing and pushing the USB adopter back in. After many tries, the adopter was automatically recognized in my PC.

Please load the realflight g4 in the PC first.
Then try the following - the Avionic transmitter should be in "On position"
The small 2 pin should be in the simu holes of the Avionic RZ7 receiver.

the sim wire for the usb dongle  does no go into the rx in the conventional manner u have to reverse and then plug it in ...watch the videos on the site

Dear Agrawal,
1) see your USB Cable Condition, if bad replace it
2) chk your USB drivers on PC & LAptop,
3) if all is fine, then this  Radio is bad, there is an 8-pin SMD IC definitively bad inside this radio, this happens because many of us don't keep Earthing/Grounding proper on mains supply, which get slight AC on chassis, one must use tester to see that there is proper grounding/earthing, many times we repair Laptops with similar issues, for all delicate gadgets always ensure grounding is perfect
4) due to repeat usb use on radio the soldered usb socket get dislocated or broken, or may be dry solder, pl chk
5)Do not use brute force Technic these are all critical devices, static current also spoils, using brute force may spoil Radio system circuitry

hi, i am getting an error message when i click on the auto detect button,already installed all the softwares and settings are already done in the transmitter.
the message i am getting is "Error: Joystick could not be found"

My transmitter is "avionic RCB 7x"

please help

thanks in advance
nilesh

I did all the settings as per the manual and the video on the RcBazaar website.
Please help

nilesh ur drivers must have not been installed automatically please check for the usb to rx dongle if it is connected properly to the rx red ire on top am guessing

Its connected properly RED on the top, the Wireless simulator is "RZ WSIM"
I am using it on my HP ENVY dv7 Laptop - Windows 8
The green light on the receiver is stable, don't know whats happening.

Where to find the perfect driver for the dongle?

Should I remove all the softwares installed and reinstall it?

Hey i got the same problem...and the same reply "joystick not found".....having Win 7 and used all the above suggested method but still no positive result.....Please help me out if you peoples have sorted it out.....

open "setup usb game controllers" , what do you see their.

An old defunct thread, but posting here as the problem is the same.

More than a year ago, i was running the RCB 7X wireless simulator on my laptop.
Didn't use for a long time.
Now it says 'No valid interlink found'

Several hours of trying led to the conclusion that usb dongle is not being detected by Windows Home Premium.

Uninstalled G4 and Emulator.
Reinstalled as per Shannon video in RCB.
Found that G4 launcher is not going to the screen for inputting serial numbers.
Maybe in the initial G4 setup, the name and organisation are different from what i had input originally (and no longer recollect)

So two problems:
1. Dongle not detected. No msg saying driver installed successfully.
2. Serial numbers screen not appearing.

Tried on second laptop. That detected a Trojan Horse and quarantined EMU file.

Grateful for help. Thanks.

Edit: same Tx/Rx used for flying every Sunday without any problem. So nothing wrong with Tx/Rx.

Try reinstall using compatibility mode.

Tried compatibility mode.
Tried running as administrator.
No luck.

I think what i need is a driver for the dongle.
Can anyone help, please?

Got this suggestion from praveen jose:

i had the same problem with my fly sky too...later i tries some scratching on the metal part of the simulator usb as it was having some rust and corrosion and it worked after some time again problem and i tried connecting the simulator usb to a usb extension cable and again it started working...try it it may work...

Tried WD40! Tried extension cable.
Sadly, no luck...

@K K Iyer,
 please check the pin of the dongle where the receiver cable is connected for wireless simulation. The pin might have become loose.  

Have checked the following:
Devices shows PPM controller
Device status shows working ok
Dongle blue flashes
Dongle to Rx cable connectivity verified
Connected correctly to Rx with red on top.
Rx shows green.
Model selected in Tx is SIM.
All connections cleaned with WD40. Fits are tight.

But
Emulator shows no axis detected
Select controller option in simulator shows blank.

Since Tx/Rx work in an actual model,
I can only conclude that the Rx is not outputting signal to sim port!

How to proceed? Grateful for help.

Sir can you spot that device in device manager? Is that showing an exclamation mark?

@akhilzid,
Thanks for response. Didn't see it earlier as busy repairing 60% Curare Foamy for tomorrow.

Answers to your queries:

Can you spot that device in device manager?
YES. As PPM HID Controller.

Is that showing an exclamation mark?
NO. Says device working ok.

I've listed the whole logical sequence and checked each step.
Unable to check if Rx outputting to SIM port or not.

Emulator cant find sticks!

The last posts in this thread were in Dec 2013.
I guess all such problems were solved by then.

Perhaps one of those solutions could help me now.
Advance thanks for any help.

What to do now? Call RCB?

I checked mine today and it says 'No interlink found'.I plugged in after a long time. :( I tried with both my receivers but same problem. So its not the problem of ppm output of receiver. Running on windows 8.

Ok.Tried it on windows XP, its working! ;D

Solved. ;D Disable the antivirus software, restart the computer. Then plug in the dongle and 'launch the game' in emulator. :)