RC India

RC Equipments => Radios and Receivers => Topic started by: Abhijit Umakkar on March 29, 2018, 10:14:26 PM



Title: Avionic Rcb i6 transmitter problem please help
Post by: Abhijit Umakkar on March 29, 2018, 10:14:26 PM
Transmitter automatically sending the signal to channel 2.
After calibration this same problem occurs at channel 6 and vice versa.
All servo esc bec are check and work fine.
There is a problem with transmitter programming.
https://youtu.be/7oqVrzP3scs
Please give some solution.


Title: Re: Avionic Rcb i6 transmitter problem please help
Post by: prabal276 on March 29, 2018, 10:30:13 PM
Why create a second topic?


Title: Re: Avionic Rcb i6 transmitter problem please help
Post by: Abhijit Umakkar on March 29, 2018, 10:36:43 PM
To highlight the problem i created second time this topic.
If any one has a programming knowledge about avionic rcb transmitter then please post


Title: Re: Avionic Rcb i6 transmitter problem please help
Post by: Abhijit Umakkar on March 29, 2018, 11:36:04 PM
Why create a second topic?

sorry for
Im new on forum