|
Title: Avionics rcb6i mods Post by: Tanmay.mathur on January 23, 2016, 03:56:29 PM Hi all
i could remember when this tx arrived to me i was quite disappointed to see that ch5 and ch6 2 and 3 position switches today i opened it and replaced thos ch5 and ch6 with variables . 1.remove tx batt. Open the tx 4screws on back and gently remove back. 2. There u can see 2 small rectangular pcb namely g3 a and g3b 3. Desolder the swith and replace with a 1k ohm potentiometer 4. Repack it sorry i am a electronics guy so i dont know how to apply the settings of othe variables on these aux channels. I also did a mod to add 2 more channels to the tx but i only have rz6 so i dont recieve those 7th and 8th channel . But stay tuned i will soon fing out . Thanks Title: Re: Avionics rcb6i mods Post by: Tanmay.mathur on March 19, 2016, 09:31:25 PM How to delete a topic ?
|