Hello,
I had a question about the fs t4b . Can the fst4b and r6b  work for a tricopter?? I have a zmr mwc lite and I have connected it to the receiver.  the throttle to ch 3 , roll to ch 4, pitch to ch 2 and yaw to ch 1. It is not responding at all.HELP PLEASE! !! Thanks in advance  

The receiver connection is wrong, it is as follows :

Roll to Channel 1, Pitch to Ch2 , Throttle to Ch3 and Yaw to Ch4

No, it still wouldn't work .. The receiver is not doing what it should

I suggest connecting the Throttle to Ch3. as the ct6b . As the Ct6b needs to be programmed ... you might as well connect the Roll to Ch1 and Pitch to Ch2. . That was what i did . It also is not necessary to use your yaw mechanism/servo at first with the KK Board as some firmware(s) versions of KK Board( or whatever you have) have reported the Ch4. or Auxiliary Channel to not work with the config sometimes .... but again that is some cases ...
Contact me for Details - losblancoslpu13.446@gmail.com