|
Title: Connect Tx to computer using audio cable Post by: Pikle6 on May 09, 2009, 02:44:50 PM hi guys, can a Tx be connected to the computer using audio cable? i know it can be. but don't know how. i presently have a turborix tx with a 3.5mm jack at the bottom fr Sim connection i tried to connect it to line in but how do i move forward than this step please suggest thanks. and by the way sai uncle doesn't have the usb cable in stock so until it comes i want to use it this way. please help!
Title: Re: Connect Tx to computer using audio cable Post by: tg on May 09, 2009, 03:38:26 PM Try the website - www.smartpropoplus.com - on how to set up your Tx with a PC. Assume you are using FMS as the simulator.
Title: Re: Connect Tx to computer using audio cable Post by: Sreedhar on May 09, 2009, 10:40:57 PM Hai Pikle ...We can connect the TX with the computer using audio cable. I use a SPEKTRUM DX6i it has a 3.5mm jack as trainer. We can use any FMS i use REAL FLIGHT G4. Just go to www.smartpropo.com download the software. The steps are explained on the web page. There is no need to buy an expensive cable...
Title: Re: Connect Tx to computer using audio cable Post by: Pikle6 on May 11, 2009, 12:41:14 PM thanks a lot guys i have managed to use fms with my transmitter i have also calibrated by tx but while flying my controls respond very unexpectedly like with throttle zero plane takes off increase throttle it crashes please explain
Title: Re: Connect Tx to computer using audio cable Post by: tg on May 11, 2009, 01:06:10 PM When calibrating the TX with the sim check which controls are reversed in the sim. The ailerons and elevator controls will need to be reversed the rest should not be.
|