|
Title: Connecting FlySky TH9X to a battery with no 3 pin connector Post by: gauravrockstar8 on May 19, 2018, 01:48:28 AM I have a 3S LiPo battery with a balancing port and a JST port. I wanna plug it into my FlySky TH9X which has a 3 pin connector. Any suggestions how can I manage to connect it?
Title: Re: Connecting FlySky TH9X to a battery with no 3 pin connector Post by: Balakrishna Reddy on May 19, 2018, 08:40:42 AM You might have got the JST along with battery holder right. Just desolder or cut them and connect it to your battery.
If you don't have one you may need to purchase that connector which is available in few electronic stores. If nothing works then open your 9x and solder wires across supply and put a connector of your choice and do the same thing to you battery. Title: Re: Connecting FlySky TH9X to a battery with no 3 pin connector Post by: girishsarwal on May 21, 2018, 12:56:09 PM Keep a check on polarity on the 9x, the center pin is positive and outer pins are negative on the TH9X. This radio has a reputation of frying when the polarity is reversed.
|