RC India

RC Equipments => Radios and Receivers => Topic started by: Himadri Roy on May 26, 2015, 02:29:53 PM



Title: ER9x problems
Post by: Himadri Roy on May 26, 2015, 02:29:53 PM
I flashed my FlySky Th9x(Mode 2) with the latest ER9X firmware but i encountered a problem
The trim buttons looked reversed(the trim button below elevator and aileron now are causing changes to the Rudder and Throttle and vice versa )
Please help!
Thank you!
 :hatsoff:


Title: Re: ER9x problems
Post by: Himadri Roy on May 26, 2015, 03:21:55 PM
Reflashed the firmware but the problem is still there  :banghead:  :help:


Title: Re:
Post by: akhilzid on May 26, 2015, 05:18:23 PM
Can you please post the link/ version details of er9x that you flashed.


Title: Re: ER9x problems
Post by: SK1701 on May 26, 2015, 07:17:46 PM
I think there is a feature called CrossTrim which causes this in one of the Radio setting menu. It may be the general menu. I will check and get back to you but see if you can find it and change the setting.


Title: Re: ER9x problems
Post by: SK1701 on May 26, 2015, 07:35:50 PM
OK I just checked my radio. Go to 'Radio Setup' and then the 'Controls' menu and set CrossTrim to OFF.


Title: Re: ER9x problems
Post by: Himadri Roy on May 26, 2015, 08:22:33 PM
Yeah problem solved Thank you!