RC India
Welcome Guest, please login or register.
 
Pages: [1] 2  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: June 16, 2012, 02:09:40 PM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012




Hi Guys,

Just registered to RCIndia and dropping my 1st question about TX and Simulator cable.

Doubt 1.
I have purchased
http://aeroworks.co.in/radio_8505.html

Will this transmitter work with following FMS Cable
http://rc4all.co.in/product_info.php?cPath=35_86&products_id=146

I went through posts who have mentioned same but none has confirmed this as working.

Doubt 2.
Also if anybody has used this combination, do I need to put battery in tx while using it as simulator?

Doubt 3.
should I go for FMS or http://rc4all.co.in/product_info.php?cPath=35_119&products_id=145

Thanks In advance
-Abhishek
 Cheesy
Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #1 on: June 16, 2012, 02:12:32 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



you can use normal programming USB cable for that transmitter as a simulator cable, i am using it for aerofly pro deluxe and fms. however you need to install a few drivers and some software.
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #2 on: June 16, 2012, 02:17:30 PM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012



@ coderbanna :
Hey thanks for reply,

I tried using PPJoy and T6-sim....but in T6-sim it is not detecting any port.
and my t6config is woking fine.

I hope by drivers/software you referring to these two, if not please let me know which drivers/sw.
Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #3 on: June 16, 2012, 02:47:41 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



did you tried selecting port COM-3 in t6-sim it works perfectly.
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #4 on: June 16, 2012, 06:56:59 PM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012



My com list shows blank...
 Sad
Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #5 on: June 16, 2012, 07:29:54 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



did you connected your transmitter and  powered it on?
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #6 on: June 16, 2012, 07:30:50 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



remember i am talking about normal programming USB Cable like this one

http://hobbysea.com/products.php?69&cPath=8&sid=ce9b609426ac4e39d907f83b2190cb50
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #7 on: June 16, 2012, 07:47:09 PM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012



Yes I have the same one which came with TX,
I use the same one for t6config...
Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #8 on: June 16, 2012, 08:28:35 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



if you can see it in t6config then just install PPJoy, make a virtual joystick by default settings and then use this joystick in T6Sim. its quite easy to do. use port Com3 when asked.
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #9 on: June 16, 2012, 08:52:30 PM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012



Hmmm.... i tried it but for some reason my com port list is empty in t6sim....
I will try it once more and will post images here.....may be it'll help....

Also which os ur using....m on windows 7 ultimate....
Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #10 on: June 16, 2012, 08:54:13 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



same here, windows 7 ultimate
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #11 on: June 16, 2012, 10:03:02 PM »
rahulsahu
Plane Lover
Active Member

**

Reputation Power: 2 
rahulsahu has no influence.
Offline Offline

City: jaipur
State: Rajasthan
RC Skills: Beginner
Posts: 96
Join Date: Feb, 2012



it doesn't wrk on windows 7..... Bang Head
Logged
 

Read
« Reply #12 on: June 16, 2012, 10:04:14 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



@rahulsahu it works very fine with windows 7, no problems whatsoever
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #13 on: June 17, 2012, 08:06:15 AM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012



@coderbanna, you mentioned you need to power it on for using it.
I tried it with power on/off, with battry and without battry....all four combinations
which does .

Any how if this needs battries to be inserted while using with simulator....i will go with http://rc4all.co.in/product_info.php?cPath=35_119&products_id=145


Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #14 on: June 17, 2012, 08:44:32 AM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



yes, using dedicated simulator remote is far better, cause you will definately need battery for that.
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #15 on: June 17, 2012, 01:41:28 PM »
rahulsahu
Plane Lover
Active Member

**

Reputation Power: 2 
rahulsahu has no influence.
Offline Offline

City: jaipur
State: Rajasthan
RC Skills: Beginner
Posts: 96
Join Date: Feb, 2012



it's not work Bang Head...i said behalf of my personal experience.....  Undecided
Logged
 

Read
« Reply #16 on: June 25, 2012, 11:39:43 PM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



Abhishek - did it work?
Logged
 

Read
« Reply #17 on: June 25, 2012, 11:43:34 PM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



what did not work? comeone, tomorrow come online and give me teamviewer session , i will check and set it up.
Logged

Even if i say halalujah, it aint fly...
 

Read
« Reply #18 on: June 26, 2012, 08:44:29 AM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012



@ rastsaurabh: no it did not work for me....i'm out of town for 2 weeks for office, see if you can do teamviewer session with coderbanna....if it works....i will also do it....
Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #19 on: June 26, 2012, 01:31:27 PM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



hello banna ji,
Appreciate your help but due to urgency will not be able to join till weekend. But in the meantime please help in providing the details as under.

> I am assuming FS 6ch tx can be used as remote.
> I have TX and cable which came with it ( bought it through RC Bharat)
> which S/w to be used to set the controls ( T6 which came with TX does not work on any of the com ports. I am yet to try Turborix and ATeasy.

> Which free simulator is available and from where it can be downloaded
> How to connect

regds.
Saurabh
>
Logged
 

Read
« Reply #20 on: June 26, 2012, 04:06:31 PM »
rajeshdubal
Mechie
Plane Lover
Active Member
**

Reputation Power: 1 
rajeshdubal has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 25
Join Date: Oct, 2011



Hello guys,
I just received my Tx-Rx (6Ch FlySky CT6B) yesterday from rcbazaar. I sat up for a long time trying to make it work with FMS and its done. I will post the proper instructions. I am running Windows 7 (32 bit).

I used this link for the info http://www.mycoolheli.com/CT6BHOWTO.html

Firstly, you need to have PPjoy and T6sim. Dont download the ppjoy in that webpage.
Make sure you have the latest PPjoy, the older one wont work !

Setup the Ppjoy virtual joystick by making a new virtual joystick and then mapping it with 6 axes, 2 buttons and 0 pov.
Open t6config and go to "open" and select the t6config file provided in the attachment from that webpage.
Select your com port and check if the bars are responding to joystick movement. CLOSE T6config ! Remember that!
Now open T6sim and open the port for your COM and then select the joystick.
Open FMS, calibrate your joystick and enjoy playing !  Thumbs Up
Logged

Winged Dream
 

Read
« Reply #21 on: June 26, 2012, 04:27:08 PM »
bLoGgEr
RC bLoGgEr
Plane Lover
Active Member

**

Reputation Power: 1 
bLoGgEr has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 10
Join Date: Jun, 2012

I aM wAt i M



@jjaaxx44

I hope You will find the Solution in this thread .
http://www.rcindia.org/radios-and-receivers/configure-ppjoy-to-tx-for-free-simulation/
Logged
 

Read
« Reply #22 on: June 28, 2012, 07:58:11 PM »
jjaaxx44
Plane Lover
Active Member

**

Reputation Power: 1 
jjaaxx44 has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 32
Join Date: Jun, 2012



@bLoGgEr: Hi I did try your post and http://www.mycoolheli.com/CT6BHOWTO.html
I get problems when I get to step 10 and 11. I do not see com port even when I click open com.
I can see my device connected in T6config ans in device manager.

see attached images 1 and 2.


1.jpg
Re: FMS Cable and FlySky simulator
* 1.jpg (57.46 KB, 800x722 - viewed 3907 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Abhishek Chaudhari
9370963629
 

Read
« Reply #23 on: June 29, 2012, 12:19:02 AM »
rastsaurabh
Plane Lover
Forum Hero

*****

Reputation Power: 19 
rastsaurabh has no influence.
Offline Offline

City: Noida
State: Haryana
RC Skills: Intermediate
Posts: 1558
Join Date: Mar, 2012



hi abhishek,
I could connect my tx on to vista. Do not try Simulators first connect the TX as is with t6 config. Remove all installations.
> do not connect anything to computer
> Have Usb drivers installed
> once USB drivers installed connect the cable to USB ( DO NOT CONNECT THE TX)
> See the device manager  ( try changing the port to 3,4) It can be done. There will be issue your Mouse dongle/ photon will be using these ports ... remove them.
> once you get the device on 3,4 port no. 
> Install T6 config & restart system
> check Device manager again
> connect the other end of cable to TX
> switch ON TX
> run T6, select the same port as in device manager
> check the sticks you should have synch
> Get user & save settings

With this steps i could connect TX to laptop. now searching for good simulator to practice.

Hope this helps  regds /// saurabh
Logged
 

Read
« Reply #24 on: June 29, 2012, 01:16:08 AM »
coderbanna
Plane Lover
Senior Member
***

Reputation Power: 3 
coderbanna has no influence.
Offline Offline

City: bikaner
State: Rajasthan
RC Skills: Beginner
Posts: 215
Join Date: Apr, 2012

☼ noob as always ☼



realflight is top in my list, aerofly is very close.
Logged

Even if i say halalujah, it aint fly...
 

Pages: [1] 2  All   Go Up
Jump to: