|
Title: FS CT6B stick not centering Post by: manishmk on August 26, 2014, 01:05:30 AM Hello guys!
I bought a FlySky CT6B transmitter at a local hobby shop nearly 2 years ago. It worked fine initially and it was laying idle in the shelf for about 6 months, and once I started using it again, I noticed the right stick was not moving freely. It was almost as if the springs had gone bad. I opened it up and found the springs were just fine. So I used machine oil to lubricate the stick's mechanism, but that hasn't helped. What do y'all suggest I do? It is extremely difficult to fly a quadcopter with wonky sticks. And also, the elevator trim lever is completely jammed and doesn't move at all. I am having thoughts of upgrading to a better radio, but I have several FS receivers, and have never had signal issues with FlySky. Title: Re: FS CT6B stick not centering Post by: tantragna on September 06, 2014, 12:20:38 AM So the stick issue is only when the back cover is closed or even experienced when open? Maybe any of the wires getting entangled to the gimbal. And wondering how the trim lever is jammed, maybe it was stored without any protection. A few pics would help to fix it, or was it fixed already?
Title: Re: FS CT6B stick not centering Post by: miginstruments on September 06, 2014, 01:11:16 AM look out for the adjustment screws at the sides of the spring. maybe u can adjust it by doing screw setting.
Title: Re: FS CT6B stick not centering Post by: deva.d on September 18, 2014, 10:48:01 PM hello guys,
do any one know how to repair a broken antenna of fs ct6b thanks |