RC India

RC Equipments => Radios and Receivers => Topic started by: flying doc on April 25, 2010, 11:21:18 PM



Title: Glitches
Post by: flying doc on April 25, 2010, 11:21:18 PM
Guys, need suggestions.
I'm flying with a Futaba 35MHz PPM and for the last couple of weeks on our field we have been getting glitches in a few places. The plane goes into hold and then recovers in a second . One such place is right in the landing path.
Any suggestions?
Any views on the Assan 2.4 hack? Would it work with 50 cc Gassers? How is the confidence with the hack?
Doc


Title: Re: Glitches
Post by: anwar on April 26, 2010, 01:19:22 AM
First question... does this happen with multiple aircrafts, or just only one (or two) specific model(s) ?


Title: Re: Glitches
Post by: flying doc on April 27, 2010, 08:06:10 AM
It has happened with Electrics, nitros and Gassers, on various frequencies, 35, 40 for sure and 72 maybe


Title: Re: Glitches
Post by: anwar on April 27, 2010, 09:18:42 AM
Your field must be in the line of strong sources of signals that can interfere with these bands.  Did people on 2.4Ghz do/feel any better ?


Title: Re: Glitches
Post by: flying doc on April 27, 2010, 10:30:35 PM
2.4 had no problems and another thing that was slightly off track. All the guys flying on 9 ch were doing fine. it was the radios on 6 ch that had the probs. can't understand that.


Title: Re: Glitches
Post by: anwar on April 27, 2010, 11:03:18 PM
All the guys flying on 9 ch were doing fine. it was the radios on 6 ch that had the probs. can't understand that.

That is strange ! Is it a freak coincidence that the 9 channel folks did not fly in the exact same areas, or never had their antennas directly pointed at the models (just by habit etc) ?


Title: Re: Glitches
Post by: flying doc on April 27, 2010, 11:15:10 PM
Really can't understand. Maybe We'll try to fly again next sunday and then see what happens. If the glitches are still there then any suggestions?