Title: HELP - HiTec Optic Sport 2.4 GHz Radio System Post by: sanjayrai55 on January 08, 2012, 05:55:42 PM Hi all
In November '11 I bought a HiTec Optic Sport 2.4 GHz Radio System & later I had purchased an extra Optima 7 receiver I am having a problem & need your help I am not getting any output signal in the radio in Ch1 which I normally use for Aileron. If I plug the Aileron Servo plug into another channel, it works fine, ie the problem is only with that particular channel. This problem occurs in both receivers, leading me to believe it is a Tx problem. But, when I plug it into the Sim, all channels work OK! Please HELP guys!! Thanks Sanjay Title: Re: HELP - HiTec Optic Sport 2.4 GHz Radio System Post by: anwar on January 08, 2012, 06:03:06 PM Do you use the same model in the TX for both the sim and for the plane ?
One simple step would be to reset the model memory for that particular model. Title: Re: HELP - HiTec Optic Sport 2.4 GHz Radio System Post by: sanjayrai55 on January 08, 2012, 06:08:16 PM I tried using a different model no. Normally my model Nos. were 0 & 1, so I set it on model 2, and still the same problem! On the sim, it was still model 2. Maybe the Tx is giving some output? But both Rx off, I'm totally foxed!
|