|
Title: how to program a hk 2.4ghz channel tx..basic guide frm starting..? Post by: d33ptam on November 26, 2010, 09:48:33 AM hi...
i am a newby in rc and have just bought a hk 2.4ghz 6channel tx-rx.. i am using the t6 config software..but am not able to understand anything..neither the terms mentioned there..can any1 help me or give me a link to find a manual which contains everything about the tx-including all terms ,their functions and programming.. Title: Re: how to program a hk 2.4ghz channel tx..basic guide frm starting..? Post by: dinil on November 26, 2010, 10:14:11 AM this might be helpful
http://www.youtube.com/watch?v=d2aZgK6sd5Q Title: Re: how to program a hk 2.4ghz channel tx..basic guide frm starting..? Post by: Drone on November 27, 2010, 10:39:07 AM Assuming that you are on Mode2..
http://www.rcindia.org/rc-general-topics/hk-tx-wont-budge/msg22087/#msg22087 (http://www.rcindia.org/rc-general-topics/hk-tx-wont-budge/msg22087/#msg22087) User Manual: http://www.hobbyking.com/hobbyking/store/uploads/374415101X134339X2.zip (http://www.hobbyking.com/hobbyking/store/uploads/374415101X134339X2.zip) See 'FILES' section in the link below: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042 (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042) Title: Re: how to program a hk 2.4ghz channel tx..basic guide frm starting..? Post by: hangingtough on November 27, 2010, 12:37:42 PM hi,
I your system cannot work with T6 then you can use another open source software Turborix.exe I am using this as the T6 will normally hang my system The process and other document is listed by me on the below post http://www.rcindia.org/rc-general-topics/hk-tx-wont-budge/ (http://www.rcindia.org/rc-general-topics/hk-tx-wont-budge/) |