RC India

RC Equipments => Radios and Receivers => Topic started by: palwindersingh on January 23, 2013, 07:33:34 PM



Title: i wana reset my flysky 6ch how is it?
Post by: palwindersingh on January 23, 2013, 07:33:34 PM
i wana reset my flysky 6ch  how is it?  plz help me


Title: Re: i wana reset my flysky 6ch how is it?
Post by: palwindersingh on January 23, 2013, 08:09:20 PM
my flysky ch4  only working what happen? i am confuse now plz any body help me


Title: Re: i wana reset my flysky 6ch how is it?
Post by: anwar on January 23, 2013, 08:11:08 PM
How do you know that only channel 4 is working ?  Have you connected a *working* servo to other channels and tested by moving the appropriate sticks ?


Title: Re: i wana reset my flysky 6ch how is it?
Post by: arun.sreelakam on January 23, 2013, 08:58:25 PM
Hey dont get upset.. try this first.. download the attached file..
connect the transmitter to pc.. open T6config..
select the appropriate port then click open and select the downloaded file...
press open..
you are done..
sorry unable to attach the file here.. send me your mail id.. will send it
 :thumbsup: :thumbsup:


Title: Re: i wana reset my flysky 6ch how is it?
Post by: avesh on January 24, 2013, 11:39:39 AM
there is no way to reset the firmware, even my ct6b has throttle issue and cannot be solved.


Title: Re: i wana reset my flysky 6ch how is it?
Post by: palwindersingh on January 24, 2013, 12:06:37 PM
i have same problem my throttle not work  too and i m now sad  :banghead:


Title: Re: i wana reset my flysky 6ch how is it?
Post by: palwindersingh on January 24, 2013, 12:07:51 PM
my email palwindersingh.2008@gmail.com plz send me default setting file 


Title: Re: i wana reset my flysky 6ch how is it?
Post by: avesh on January 24, 2013, 12:30:14 PM
check your mail


Title: Re: i wana reset my flysky 6ch how is it?
Post by: rastsaurabh on January 24, 2013, 01:26:23 PM
Dear Palwinder,
You will have a tough time if you are not aware of things and how to do???

if you have connected ESC it may also happen that you have reprogrammed esc so throttle will not work.

have u connected tx to a PC ?? If you havent done that you dont need to reset.

 the following steps can help you connect TX to PC.
 Remove all installations.
> do not connect anything to computer
> Have t6 Usb drivers installed
> once USB drivers installed connect the cable to USB ( DO NOT CONNECT THE TX)
> See the device manager  ( try changing the port to 3,4) It can be done. There will be issue your Mouse dongle/ photon will be using these ports ... remove them.
> once you get the device on 3,4 port no. 
> Install T6 config & restart system
> check Device manager again
> connect the other end of cable to TX
> switch ON TX ( Batteries should be there in TX)
> run T6, select the same port as in device manager
> check the sticks you should have synch
> Get user & save settings

With this steps i could connect TX to laptop.


if you need any help do call on 8826298725 for instant help/ advice.

saurabh


Title: Re: i wana reset my flysky 6ch how is it?
Post by: avesh on January 24, 2013, 01:34:24 PM
althou ct6b is pretty cheap and could be a good deal for beginners but i would recommend only for park flyers and heli clones.


Title: Re: i wana reset my flysky 6ch how is it?
Post by: rastsaurabh on January 24, 2013, 01:43:34 PM
yes true...... its a nasty TX. you cant even reverse a servo without a PC....


Title: Re: i wana reset my flysky 6ch how is it?
Post by: palwindersingh on January 24, 2013, 03:12:47 PM
avesh send me file that work thanks  guys   


Title: Re: i wana reset my flysky 6ch how is it?
Post by: saikat on January 24, 2013, 03:27:05 PM
Why do you not read what is written ?

Do you have a servo ??

If yes then pls plug the servo into channel 3 and move the stick
Up and down .... does the servo move ???


Title: Re: i wana reset my flysky 6ch how is it?
Post by: avesh on January 24, 2013, 04:25:40 PM
if you need config for plane here is the link. http://www.youtube.com/watch?v=f3dZMELsvxA


Title: Re: i wana reset my flysky 6ch how is it?
Post by: Sumit0200 on June 27, 2019, 11:59:50 AM
sumit.srm0200@gmail.com


Title: How to do default setting on flysky FS-CT6B?
Post by: Jaypatel9715 on February 22, 2021, 09:20:51 PM
Hello all,
I have flysky FS-CT6B transmitter and I want to do default setting.
So can anyone have default setting file for this transmitter??

Please help me with this!!

Email- pateljayd3@gmail.com


Title: Re: i wana reset my flysky 6ch how is it?
Post by: Jaypatel9715 on February 22, 2021, 09:23:09 PM
Hey palwindersingh,
I am facing the same problem as you had.
So can you pls send me the default setting file that avesh send to you??

Please help me!!!!


Title: Re: i wana reset my flysky 6ch how is it?
Post by: Prajwal Kulkarni on December 18, 2022, 01:23:51 PM
Guys, even my transmitter somehow got into this weird configuration and now only channel 4 is responding
if someone has the default t6 config file, please! send it to me
my email is prajwal.kulkarni2020@gmail.com