RC India

RC Equipments => Radios and Receivers => Topic started by: anwar on July 01, 2009, 05:09:24 PM



Title: Intermediate/advanced radio setup for airplanes
Post by: anwar on July 01, 2009, 05:09:24 PM
Dual rate (DR), expo, etc...  what they do, and how to set them up.

http://www.youtube.com/watch?v=_CGS1voU8vY


Title: Re: Intermediate/advanced radio setup for airplanes
Post by: controlflyer on July 26, 2010, 02:34:58 PM
Good job Anwar,
This is very helpful!


Title: Re: Intermediate/advanced radio setup for airplanes
Post by: johnsonrego on May 21, 2012, 09:13:55 AM
Dear Anwar,
Above video cant be viewed & says private. How to view the video?


Title: Re: Intermediate/advanced radio setup for airplanes
Post by: roopeshkrishna on May 21, 2012, 11:41:05 AM
the radio, price, all are changed to a great extent by this time..  more thrills and frills.. but low price.. :thumbsup:


Title: Re: Intermediate/advanced radio setup for airplanes
Post by: anwar on June 17, 2012, 12:02:11 PM
http://rcqatar.com/airplanes/great-set-up-tips-for-aerobatics-and-3d-planes/


Title: Re: Intermediate/advanced radio setup for airplanes
Post by: darpanruparel on September 30, 2014, 12:30:45 PM
can you please tell me can i use brushless motor which is recommended to use with lipo 2s 7.4v , with 4s or 5s battery?


Title: Re:
Post by: sachin_k5 on September 30, 2014, 03:10:03 PM
Darpan, when the voltage goes up the amp goes up, you will have to check the max amp rating for the motor else it will burn out.


Title: Re: Intermediate/advanced radio setup for airplanes
Post by: Naresh9807 on February 08, 2017, 09:57:58 PM
hey i am not able to see your videos.it says its private.what should i do??


Title: Re: Intermediate/advanced radio setup for airplanes
Post by: rabak63 on September 06, 2017, 06:16:57 PM
hey guys, can anyone explain what does U33 and U 34 mean, this is shown on the screen when you switch on a RCB 6i txn.  I have 2 txn the last one shows U33 on startup, functions well...the new one says U34 and just keeps beeping, what am I doind Wrong...help