RC India

RC Equipments => Radios and Receivers => Topic started by: gaurav jain on January 08, 2015, 05:17:24 PM



Title: problem in 5.8ghz 2000mw very low range
Post by: gaurav jain on January 08, 2015, 05:17:24 PM
I have  5.8ghz 2000mw boscam tx and rx 305

I tested with 5dbi circular polar.anteena i got onle 10feet range

Plz help what can i doo plz help


Title: Re: problem in 5.8ghz 2000mw very low range
Post by: sooraj.palakkad on January 08, 2015, 06:29:54 PM
Which battery packs you used in Transmitter , and Receiver ?

Which channel you used ?

What is happening if you go beyond 10Ft. ?


Title: Re: Re: problem in 5.8ghz 2000mw very low range
Post by: arun.sreelakam on January 08, 2015, 09:37:22 PM
Did you ever connected the battery without installing the antennas.. if so it may make some range issues sometimes..


Title: Re: problem in 5.8ghz 2000mw very low range
Post by: gaurav jain on January 08, 2015, 10:41:45 PM
I used 3s 2200mah lipo battery


Title: Re: problem in 5.8ghz 2000mw very low range
Post by: gaurav jain on January 08, 2015, 10:44:18 PM
I think first time used without anteena connect



So what can i do if i connecter 3s battery to tx with anteena


Title: Re: problem in 5.8ghz 2000mw very low range
Post by: gaurav jain on January 08, 2015, 10:45:56 PM
All channel cheaked  in tx rx one by one but no diffrense in range


Title: Re: problem in 5.8ghz 2000mw very low range
Post by: sooraj.palakkad on January 08, 2015, 11:37:39 PM
Which battery at receiver, isn't it a 2S ?

And is the antenna connector perfect ?


Title: Re: problem in 5.8ghz 2000mw very low range
Post by: gaurav jain on January 09, 2015, 05:02:32 AM
same 3s batgtery and antenna connector are also checked all are good as per i seen in youtube video

i think prob is that

when i connect first time without anteena  so the power of anteena going from tx is low thats y i range is very low

so plz help how can i repair this

if u know plz reply

and thanxs for ur replys


Title: Re: problem in 5.8ghz 2000mw very low range
Post by: shadman_alam on January 09, 2015, 06:01:02 AM
You probably have burnt ur tx.. Get a new one.. Cant be repaired.. You should NEVER switch on a tx without antenna.. Thats fundamentals of RF..

There could be a possibility that you are not on the same frequency on rx and tx..