Hi,

details:
tx - futaba T6J
system - laptop
processor - intel core 2 duo T5450@1.67GZ
OS - windows 7 ultimate sp1
graphics card - nvidia geforce 8400m GS

Got a 3 in 1 sim from rcbazaar recently.

S/w installed successfully.
when dongle connected with pc says driver installed successfully.

When tx switched on the dongle light starts blinking.
i started afpd by clicking desktop shortcut icon.

when went to "calibrate tab" it shows "analog joystick #1 ok 12"
But i have 6 channel tx. its showing as 12 channels.
When doubleclicked it all channels input seems empty.
Tried to calibrate it. But nothing happened in the channel input tabs.

When tried to fly the airplane is not in control.

Easily the square pin becomes loose which is connected to the tx.
I need to hold it manually so that the dongle starts blinking again.

 
Kindly help.

Which software are you using? as in Real Flight, pheonix...

Give a call to RcBazaar Dilip or send a mail to support@rcbazaar.com
I would suggest you to try Realflight G4 instead of Aerofly. Personal Suggestion.

sudhir,
I have used aerofly. In that i faced the issue.

Jayatu,
Thanks for suggestion.
I am more interested in aerofly.
Will short issue and try other things.

Since you are using Win7 it would be wise to check if the OS can recognize the radio.
To do this open "Game Controllers" in "Control Panel". Check if the radio is detected - if it is you will see at least one controller. In my case it shows "SAILI Simulator --- G5.0 Controller"
If it does show up, check whether the channels/signal are/is detected by clicking on "Test".

In my case the radio was detected however the x-axis/y-axis plot would not show any movement. I changed few things on the radio and it hooked up like a charm.

Doing the above will help determine if the problem is at the radios end or the Sim software and you can move forward form there.

Hope this helps

Hi raja,

Thanks for ur suggestions.

Actually my win7 corrupted. I need to reinstall and try.
It worked in xp sp1. but my graphics driver did not install properly and did not get sound either.

Currently i am remote and could not access my tx and system.

Will give it a try and let u know.

Cool

New problem :
I have installed G4 (English selected during installation) using the DVD supplied with the 3in1 sim from RCB. All the menu items in the task bar and some of the names in the drop down menu are in Chinese!
I read through the .pdf manual and searched online for solutions to no avail.

How can i switch to English?