RC India

RC Equipments => Radios and Receivers => Topic started by: hangingtough on December 15, 2011, 11:54:21 PM



Title: range problem on HK 6ch TX
Post by: hangingtough on December 15, 2011, 11:54:21 PM
hi,

i happen to break the antenna of my TX with the connecting wire also

Then i reconnected the antenna back but there is a major reduction in range less than 100 meters without the satellite receiver.

Do you know any way the basic range of the TX can be increased


Title: Re: range problem on HK 6ch TX
Post by: hangingtough on December 16, 2011, 06:01:18 PM
bump


Title: Re: range problem on HK 6ch TX
Post by: Sumeet on December 16, 2011, 06:31:41 PM
Did you reduced or increased the original length of connecting wire? Please explain How you fixed it back on Tx.


Title: Re: range problem on HK 6ch TX
Post by: hangingtough on December 16, 2011, 06:58:40 PM
yes, as the wire got short due to breakage i put a one inch normal wire to connect the antenna.


Title: Re: range problem on HK 6ch TX
Post by: Sumeet on December 16, 2011, 07:04:07 PM
That is what went wrong.
Remove that 1" normal wire. And solder the original wire as it was. then check and post here the result.