|
Title: RCB7X problem Post by: kiran rc on October 02, 2014, 08:50:35 AM Hi, I flew my plane with rcb7x radio. After the landing, the motor started beeping. Now the throttle channel is not working. All the other channels work fine. I tested in another plane. Again the same thing :(. Motor constantly beeping. Not able to figure out is it the transmitter or receiver problem :headscratch:
Please help. Title: Re: RCB7X problem Post by: kiran rc on October 02, 2014, 10:27:24 AM The channel 3 in not working :(
Title: Re: RCB7X problem Post by: Hellyflyer on October 02, 2014, 10:10:05 PM If other channels are working, you can reassign channel 3 to a aux channel and then see if the motor has the same issue.
Normally when there is an issue it affects the entire receiver rather than just one channel Title: Re: RCB7X problem Post by: kiran rc on October 02, 2014, 10:22:10 PM Hi, I have checked the throttle plugging into other channels. It works. Only problem with throttle. Currently I have assigned rudder to throttle channel.
Title: Re: Post by: santhosh-r on October 02, 2014, 10:28:17 PM May be the throttle gimbal potentiometer failed
Title: Re: Post by: santhosh-r on October 02, 2014, 10:28:28 PM May be the throttle gimbal potentiometer failed
Title: Re: RCB7X problem Post by: kiran rc on October 02, 2014, 10:34:43 PM Currently I have interchanged channels with aux.
Title: Re: RCB7X problem Post by: kiran rc on October 02, 2014, 10:44:24 PM @Santosh, the potentiometer is working fine
|