|
Title: Receiver problem Post by: laddiegill on April 28, 2011, 08:53:36 PM I have purchased a new E325 Mini Titan with receiver MT 06 MT which is not responding at all. Do I have to charge the receiver as it was worked for few days only. I have not received the receiver charger. what should I do?
Title: Re: Receiver problem Post by: ANTA on April 28, 2011, 08:56:32 PM What do you mean by Rx charger ? :headscratch:
Title: Re: Receiver problem Post by: laddiegill on April 28, 2011, 09:44:12 PM I don't know
Title: Re: Receiver problem Post by: KALYANPRODHAN on April 28, 2011, 09:47:59 PM Connect receiver with ESC, Battery and servo.
Then load battery in Tx. Power on the switches of Tx (Follow ESC Instruction) You may get receivers working. Also check the receiver battery discharged or not. If discharged just charge it. Receiver gets power from Battery through ESC. No battery installed inside Rx. http://www.rcgroups.com/forums/showthread.php?t=1364394 Title: Re: Receiver problem Post by: laddiegill on April 28, 2011, 10:12:16 PM how to check receiver battery charged or discharged? If discharged how to recharge the battery what are the connections from ESC?
Title: Re: Receiver problem Post by: netsecrets00 on April 28, 2011, 10:18:36 PM Can you post photo of your receiver?
Title: Re: Receiver problem Post by: laddiegill on April 28, 2011, 10:29:36 PM Receiver is Hitec HFS 06 MT 6 channel I will post the photo. All the connections are correct.
Title: Re: Receiver problem Post by: netsecrets00 on April 28, 2011, 10:45:06 PM I dont think so there is seperate battery for this receiver. It gets power from lipo. Try tu bind receiver with your TX again.
Title: Re: Receiver problem Post by: anwar on April 29, 2011, 01:17:01 AM Receiver is Hitec HFS 06 MT 6 channel I will post the photo. All the connections are correct. You need to provide a whole lot more BASIC information, starting with 1) Your level of experience dealing with RC in general, and helis in particular. 2) Where did you buy the heli from, and did it come assembled and ready to fly or did you assemble it ? Are the people who sold you the heli unable to assist ? 3) On one hand, you are asking basic questions, but on the other hand, you are totally confident that all connections are correct. This is confusing. 4) What transmitter are you using ? 5) You are saying the "receiver worked for a few days"... do you mean the heli worked for a few days ? What exactly do you mean with the word "receiver" ? Did you mean the "transmitter" ? In short, trying to debug/assist in such issues remotely requires a lot more information to be made available, preferably with pictures. One thing is for sure, you will need the transmitter to have adequate battery power, and the lipo battery you use on the heli (I guess the one you are calling receiver battery) also needs to have adequate charge. Usually the lipo used to power the heli will last less than 15 minutes, so again there is some confusion when you said "it worked for a few days". Your best option may be to meet up with local flyers, and this can be a good start : http://www.rcindia.org/rc-people/searching-members-by-city/ |