|
Title: xbee question Post by: mai on February 05, 2012, 10:19:37 PM hey guys,
i have a question about the xbee modules, How can we connect it to the computer (the one that acts as a transmitter). Use xbee + xbee Shield + Arduino or just xbee + USB adaptor? and in either case the PC will act as the controller, right? thanks in advance Title: Re: xbee question Post by: RotorZone on February 08, 2012, 08:07:05 PM Just xbee + USB adaptor is enough for PC to communicate to Xbee.
Title: Re: xbee question Post by: anwar on April 07, 2012, 08:17:48 AM http://diydrones.com/profiles/blogs/announcing-the-3dr-radio-telemetry-system
Title: Re: xbee question Post by: Swapnil on April 07, 2012, 08:45:18 AM Wow, these are good and affordable!
Title: Re: xbee question Post by: sumeet_sic on April 11, 2012, 01:16:28 PM Are you looking for these:-
Xbee USB adaptor http://shop.sumeetinstruments.com/index.php?route=product/product&path=41&product_id=124 Xbee products http://shop.sumeetinstruments.com/index.php?route=product/category&path=41 Yes, no micro-controller is required for the USB board. you can communicate and set properties of the xbee module using the X-CTU software. On the arduino/other microcontroller you may use the SIP adaptor or Xbee adaptor on breadboard or prototype board. |