RC India

My avionics RCB 6i reciver is not working , can it be repaired or is there any reciver of other brand that could work with avionics RCB 6i transmitter , pls help

Plz elaborate the problem with some pics....

First of all thanx for replying , actually its led is not working and usually my esc made sound consisting of 3 to 4 beeps which now makes only two beeps when connected with rx and motor , also moving the sticks on tx doesn't make starts the motor or servos

basically RCB 6 radio has a problem of range lost of less than 50mm and check that you bind radio properly and it is not not more reliable radio you have to bind at least more than 50mm distance

Not clear what you mean  :headscratch:

Three of our local flyers using RCB6 without any problem...

Since you are in Pune, perhaps you could take your tx/rx to the local branch of RCBazaar...

sir i and one of my friend have same problem when we take radio near model the light of receiver start blinking and when we put radio distance from model the receiver light is steady same problem 2 rcb 6 radios and in instruction they clearly said that bind radio from distance 50mm or more
 https://www.youtube.com/watch?v=tI1o3xGf2PI

@gaurang.1972,

Did you mean “keep the rx at least 50mm away while binding”?

50mm is only 2 inches.

Maybe he keeps his rx less than 2 inches away from his tx...

sir even after binding never tx leave near rx bellow 50mm range breaks

Sorry. Again not clear to me.
Range breaks?  :headscratch:

Are you saying that if the rx is brought within 2 inches of the tx, the range gets reduced?

Throw/sell it, buy a flysky i6 or the frsky qx7. You may get it to work for now, troubleshooting- but it really isn't a reliable radio. Just don't bother with it, it's trash. Search "rcb6i" and you'll find a bunch of posts where the rcb6i doesn't work and people are asking for help.

Just my 2 cents.

Most probably your receiver got fried. I have the same problem and the spare never came on stock in RC bazar. I've been waiting for 4 months now, don't think it'll every come. Anyone has any idea what other receiver would bind with the rcb6i Tx?? Anything other than avionic company product.

In my opinion its better to stay away from "Avionics" electronics products. Tx/Rx both. Their products never show up on googling top 10/20 rc transmitter or receiver etc. Spectrum is the best choice , then Futaba and then FlySky or FrSky. FlySky is even available on amazon.

Not sure why RCBazaar is sticking to a single brand(?) like Avionics. It's killing their reputation. RCBazaar has a good infrastructure, hope one day they would sell proper brands like futaba, spectrum etc.

Note - I have used a good number of Avionics products only their motors seems to be really good.

Don't rely on avionics

Any idea why RCBazaar sells only avionics?? Is it their own brand??  :headscratch:

avionics works fine ..but for the price there are better options.
its a shame that they are even allowed to sell in ...coz beginners who have zero clue of what to buy end up buying not so good products and then might.. just might..dislike the hobby..
yes avionics is their own brand...