Last Sunday was build day with our complete undivided attention to the Ronin RC Bazaar. Wing Span 2.6 Mtrs this monster is huge with a Ample space inside the fuselage too.

Best I liked about the model are

(i) The wing reinforcement Carbon tube goes inside another coaxial Carbon Fiber tube pre-cast inside the wing Foam. and there are two such rods for the wing.

(ii) Two different tail setup are given one with inverted 'T' tail and one conventional. You can use either one and both are with removable setup. Carbon tube 3 Nos are already precast inside the foam of the vertical stab for the 'T' tail giving amazing rigidity.

(iii) The strong motor mount with groove just slides in place and fits snugly inside the cavity with pre-designed correct thrust angle.

(iv)  Compete electronics with a 600 Watts motor and ESC combo is provided with all servo pre-fitted with the complete accessories, linkages  required provided.

(v)  The Cockpit is huge with precast clear canopy which can take a GoPro and an additional FPV camera.

(vi)  In addition there is a opening and space provided for mounting a GoPro class (Only) camera in the belly facing down too.

(vi)  Flaps already built in the wing with the servo pre-installed.

(vii) Built in landing gear ( Tail dragged Tricycle) pre-installed in the fuselage.

Not a drop of CA was used for the complete assembly. Compete assembly took only an hour plus. Test flying is going to be stock later may be we will add more electronics. CG balancing achieved with 10000mah 3S Lipo.

What a monster! When you say that CA wasn't used in the assembly, I assume it can be taken apart for stowage and carriage easily?

Shame on you Gusty sir for showing off with a Skysurfer that's only 2m span! Outgunned.

@VC Absolutely, both wings separate after unscrewing the retaining screws and the complete tail assembly can also be unscrewed after disconnecting the linkage clevises.  

The Slots for the wing combined with the twin carbon reinforcement holds the wings rock solid. The retaining screw just holds wings from sliding out.

@Iyer Sir, Who can Compete with Gusty  

Waiting for the Vids

It is not the aeroplane, what you do with it matters

Of Course Gusty, what you do with that matters the most 

Enjoy the Maiden Video by Parambir

Piggy Back ride

Reminds me of the Mistel composite.

See I had to refer to your thread for that  

Sandy I suggest you start making couple of fighters, i am there on the 28th of Apr. I assure you, we will fly something very different, that which has never been done before in the world of RC flying (seems like a tall claim, but true)

PS
your foam fighters are the fun part,

Roger that Gusty.  28th April it is then.

@rcpilotacro
Let me guess...
(In pm to avoid spoiling the surprise in case my guess is correct)

Imagine Gusty once wanted to shoot himself FPV while wing suit jumping with a plane flown by himself following him with control rigged inside his gloves of wing suit with gesture control.

Iyer Sir, Knowing perspective of gustys ideas, there can be nothing more which can outdo in wildness.

Param Flew comfortably three sorties with RCB 6i the shikra.



Maiden of Airboss went as a breeze with CG bingo as expected. Though the Engine was firing inconsistently with lot of hiccups.

 

:like:

Param was flying well 

That Stik sure has a lot of power sir 

Sanjay Sir.  

One down and Nine more to go for sweepstakes  > >  

Air Boss with Cox 0.049

We were fortunate to have Gusty here in Jalandhar last weekend.

Did some Night flying with Gusty. If only we were not really pestered by the Mosquito's  then we would have stayed longer. 

Hobby King Laser Stick


Multiwii Micro quad

Some Photos with Gusty.