|
Title: help needed Post by: satyakam on November 21, 2018, 12:12:52 PM Dear Sir,
as being newbie need help on following, created an RC plane wing length 900mm wing width 110mm plane length 470mm plane frame weight 70 gms prop : 6045 electronic: motor : 2204/1400KV 23gms esc : 10A, 8gms servo : 9G, 4pcs, 36gms Rx : iA6b: 6.4gms battery : 2s Lipo : 90gms total weight : 233gms will it fly? will the ESC sustain can I use high powered Panasonic NCR18650B battery in 2S form (2C discharge-approx 6amp) no landing gear Title: Re: help needed Post by: rastsaurabh on November 21, 2018, 12:44:57 PM Hello Satyakam,
As per the specs it seems to be a very light plane & it is capable of flying with the described power setup. First show us the pic of your plane as with all the stuff used weight could easily go to 500-600 Grms. Using 18650 is not recommended as it will spoil the AUW . Better to bet on a 500 Grm 2S Lipo. All the best. regds Saurabh Title: Re: help needed Post by: satyakam on November 21, 2018, 04:55:36 PM plane getting assembled
Title: Re: help needed Post by: satyakam on November 21, 2018, 05:14:01 PM my previous plane assembled carry 450gms AUW,
wing length 730mm wing width : 100mm length : 500mm electronics : motor : 2212/1400KV ESC 30Amps Servo 9G: 4 units 3S lipo |