KINGS OF DIY RC INDIA CLUBEmail :
kingsofdiyrcindia@gmail.com WhatsApp : 9373359611
Foam Selection: Genuine Depron or Modelling Foam
We offer customers a choice of Genuine Depron or Modelling Foam. Please inform us of your choice by email after ordering. The price is the same whichever option you choose.
The consistency of Depron and Modelling Foam is almost identical. Both are made from closed cell foam.
However, Modelling foam is about 20% lighter than Depron and also not quite as strong. It is still strong enough though for model building purposes.
Modelling Foam: Modelling foam is flat (no bend in the sheet).
Shown here is a sheet 70cm x 50cm
Depron Foam: Lately Depron BV has stopped making model grade Depron so the sheets now have a slight bend in them. For built up airframes the bend in the sheets should not affect the finished product.
Shown here is a sheet 70cm x 50cm
Score Notches:
We have added a small notch to the parts to indicate where any parts need to be scored and bent. Cutting Out:
Most parts have just 3 tabs which need to be cut to remove the piece. This can easily be done freehand using the included razor blade in about 3 minutes. Then you're all ready to start building.
Vertical Stabilisers:
As seen here we include 2 sets of fins in the kit. One set has the fin with control surface cut out for those who want to install rudder servos. The other set of fins has no cut out for the control surface. This versatility allows you to build the plane your way.
Packaging:
By supplying all the parts in sheets we ensure that the parts don't move around in transit and therefore won't be bent or damaged when you receive them