RC India

Hi guys opening an online store RcMumbai.com shortly
The site is still not online but will be shortly
 to provide good quality products at better prices is our aim  :salute:  :hatsoff:  :bow:

What kind of products are we looking at ?

Products for multirotors and airplanes
List of products for sale coming up shortly 

That's amazing! Looking forward to buy from you.  :)

Good luck with your venture!  :thumbsup:

Thanks a lot

Coolest news

Congrats!!
Really good to have new stores joining the RC world. Now, we could have more options to switch to in case of "OUT OF STOCK"
When is your website going to be launched?

 :hatsoff:

All the best to you. Looking forward to your site getting operational. I hope the prices are kept reasonable. Will you also have a store front and/or logistic warehouse in Mumbai. If yes where in Mumbai and could someone come and collect from that place to save shipping hassles ?

Ankur

Well i hate the word out of
stock and would rather  keep preorders

Three places you could collect your stuff from in mumbai
Vile parle east , dahisar west ,grant road

But prior collecting

all the best chintal sir really liking your supplied foam quality
i am looking forward to buy more from you especially air compressor :P

Regards
yash :hatsoff:

Plz dont call me sir
I am happy with just my name
I hope the foam had reached safely  and in good condition
You can pre order the air compressor sorry couldn't bring it
 

Which type of foam do you supply and do you ship?

Depron one big sheet cut into halves or smaller sizes
But shipping is costly and webonly accept big orders

I would like to introduce a new product for all of you guys
We already know  that the battery of cellphones dont last long enough
I have a device on sale that is as small as a lipo low voltage alarm
Has the function of low voltage alarm and also charges you cell phone
Connect your standard lipo 2s to 6s and charge your cell phone
Your lipos will be safe with this device as it has low voltage auto cut off also
All these features in a small device makes it handy for use

Waiting for ur site....

Site will be online shortly

Good news chintal all the very best :thumbsup:

Do you have flysky radios in stock?

Thanks a lot satya sir all suggestions and advices will help me a lot

Yes flysky t6 and flysky 9x are in stock

Book one fs 9x for me then

Sure its on sale as of now so  you dont need to wait for the site to be online you can pm me for further details

Can I get your contact info Rc Mumbai??

7678013993

Hello Chintal Bhai. Guys I bet U all tat RCMumbai will be one of the best place for RC Lovers. All the Best Chintal bhai.

wow great finally mumbai,pls do some thing about carbon rods if possible and micro alll the best

Depron and balsa wood will be stocked for local pick up carbon fibre rods are also coming up shortly

hi guys
i would like suggestions for certain products i would like to see them on my site for sale at reasonable prices
please specify (the more information provided better would be the prices ) :hatsoff:
1)icharger which model would like ?
2)any  rarely available prop size and which material/type
3)motors
4)dji products
6)original skyrc chargers/motors/powersupply
7)flight control boards/gyros
8)radios
feel free to advice
i will make sure that i can supply the products that you require at the best possible price while keeping quality in mind

thanks a lot

Regards
Chintal
Rcmumbai.com

Frsky Tx modules with Rx  for futaba and jr type.
Some Beginners planes like Skysurfer type, J3 cub  like those.
Some intermediate and expert 3D models.
Hd video recorder cameras.
EPP sheets

thank you sir for the advice it helps a lot
1)well about epp sheets
i want to bring them to you guys but require a sample
just a small piece of it will do so that i can import it

2)hd video recorder camera what would you like boscam or any other gopro clones will do ?
or walkera with inbuilt rx 5.8ghz

3)planes various kits coming up as soon as the site is online (sorry for keeping you guys waiting

4)frsky any specific module ? i am also thinking about it if i get them at good prices (hope so )

Micro brushless motors
Micro servos
Micro rx with modules (like 5 in 1 rx,esc and servos)

A dirt cheap tx rx set... digital preferred...

how many channels ?
4 channel will do ?

@rcsailesh anything specific would help
thanks

yes enough...

flysky 4 channel looking forward to bring it

also some servos like avionic's 9 gm servos for 200 rs

coro hinging tool and precision scoring tool for coro ... you have to get it made....
It woulf be helpful for a lot of spad beginners but after sometime of building with coro, we don't need it...

good knives, blades and rubber cutting mats

soldering irons, solder wire, flux, etc

stuffing tubes, props and brushed motors for boats...
If possible, readymade fibreglass hulls and also kits...

turnigy 9 grams servos (good quality  servos  ) are available on my store
but if you are looking for cheaper one (quality is not so good i can provide them )

all soldering related products will be up for sale once the site starts

coro cutting tools and all will look for it
if any exmaple or link or a pic would help

thanks a lot guys
i really appreciate these advice's

boats i will need your help for exat products sir as i am not into boats
if you guide me for products that are sold frequently and the products that are rarely available but in demand
i can get those products too (again quality and price will be at its best )

Thanks

http://www.hobbyking.com/hobbyking/store/__18820__2_4Ghz_SuperMicro_Systems_HK_MFX600_F_H_Module_Futaba_Hitec_Compatible_.html (http://www.hobbyking.com/hobbyking/store/__18820__2_4Ghz_SuperMicro_Systems_HK_MFX600_F_H_Module_Futaba_Hitec_Compatible_.html)

and

http://www.hobbyking.com/hobbyking/store/__18824__2_4Ghz_SuperMicro_Systems_Receiver_ESC_and_2_x_Linear_Servos_All_in_one_5ch_.html (http://www.hobbyking.com/hobbyking/store/__18824__2_4Ghz_SuperMicro_Systems_Receiver_ESC_and_2_x_Linear_Servos_All_in_one_5ch_.html)

@ rc sailesh how many do you need ?
you can pre order right now

guys what about nanotech lipos ?

The scoring tool can be a set of metal rulers with a very small gap between them... we can score in a staight line then...

We really need a rubber cutting mat...

ok got it
will try to get some thing or invent one cutting tool..... :giggle:
necessity is the mother of invention :thumbsup:

Hello RCMUMBAI....

Congrats & good luck with your store.

I Suggest you stock the following items, the list may be never ending....but here are the items im looking forward to see in LHS

> 11-12-13 inch porps  cw & cccw  with different pitch

>FRSKY  Recievers 4ch/7ch/8 ch

>high capacity and high discharge batteries

>quarto charger to charge multiple batteries.

best tool to cut corplast accross ;D
http://www.harborfreight.com/oscillating-multifunction-power-tool-68861-8493.html (http://www.harborfreight.com/oscillating-multifunction-power-tool-68861-8493.html)

thanks a lot for your wishes buddy
11 and 12 inch props by the end of this week
other props are also coming starting from 5' to 15"
nanotech lipos will be sold at hobbyking prices
5 c charge rate and 20 to 30 c minimum discharge varying acc to batt
instead of quattro charger i would like to bring to you 400w charger original from skyrc at a very good price
i have been using it since over a year awsm charger......
 

No, we don't need that for coro...
Its too heavy duty.. :P

I was just asking for a tool that gives perfect scored lines across flutes in coro...

Also, can you introduce sets of basic tools you need on field and off field ( workshop) as a kit?

as a kit sure
how about coro claw ?
http://corrugatedplastics.net/Coro-ClawKnife.html (http://corrugatedplastics.net/Coro-ClawKnife.html)

Flysky 9x radios. Still the best VFM radios around :P

Corro dont need much tools for building unlike a foam. a small knife, CA, sand paper is best tools than anything else.
CF rods, tubes, and accessories for them for  multirotors would be a good idea.

It would be great if you can stock something related to 1/2A engines.
lots of new online shops are starting up and they stock everything relating to multirotors as they are very easy and fast moving, but for a change you could try with something in small glow powered planes to resurrect the golder era of aeromodelling.

As there are few shops whose names are quite unknown and they are always out of stock, there would not be much competition for you people too. considering the fact if the prices are reasonable more people would be jumping into engines again and there could be good business for you too. Apart from the sake of business you could earn a good name to be a sole seller of such products.

P.S i will be your first customer for a cox engine.

Hextronik dt750 brushless outrunners  :thumbsup:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6247 (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6247)

I would probably need that in near future to replace my current multirotor motors

I second that. me too need them.

Ashok.P

flysky9x is already available and up for sale

boscom will be fine
 Frsky  , links below

http://hobbyking.com/hobbyking/store/__14348__FrSky_FF_1_2_4Ghz_Combo_Pack_for_Futaba_w_Module_RX.html (http://hobbyking.com/hobbyking/store/__14348__FrSky_FF_1_2_4Ghz_Combo_Pack_for_Futaba_w_Module_RX.html)

http://hobbyking.com/hobbyking/store/__14349__FrSky_DJT_2_4Ghz_Combo_Pack_for_JR_w_Telemetry_Module_V8FR_II_RX.html (http://hobbyking.com/hobbyking/store/__14349__FrSky_DJT_2_4Ghz_Combo_Pack_for_JR_w_Telemetry_Module_V8FR_II_RX.html)

boscam and frsky noted
anything else that you guys  would like to buy from a lhs ?

hey chintal...
I would love to have these ....Hobbyking IOS & Android 4CH WiFi Receiver.

http://www.hobbyking.com/hobbyking/store/__21430__Hobbyking_IOS_Android_4CH_WiFi_Receiver.html (http://www.hobbyking.com/hobbyking/store/__21430__Hobbyking_IOS_Android_4CH_WiFi_Receiver.html)

these may really work well with small planes /micro quads/ boats /cars



***these are always in back order ....even @ HK

You can pre order them 2.4ghz wifi receiver  form ezc rc
Will let you know the price shortly

now no need to cry for broken radios
parts for radios coming up shortly
why buy a new one when you can just replace parts at fraction of a cost
only on RCMUMBAI.COM....

Happy flying guys

Regards
Chintal
Rcmumbai.com

when will rcmumbai site be online.

shortly.....

Do you have combos?

Combos of ?

rtf afr and build it yourself kits of airplanes and multirotrs both will be available on the site once it is online

Regards
Chintal
Rcmumbai.com

Combos of all electronics ( tx rx, servos, selected motor-esc-prop, lipo + charger)  Fit for a beginner's first model...
you can also sell model-specific electronics... like for avispad, blu-baby, ft racer, ft duster, corrospit,corrostang for the exact scale models...

hey RCMUMBAI when you launch your website please also give a delivery option of EMS Speed Post.. not many LHS provide this.. but to people like me who live in kind of remote places this will be of great help.

www.quadkopters.com (http://) ships using EMS that too free shipping :thumbsup:

Satyaji www.quadkopters.com (http://) rocks.. but you maintain stuff more for quads .. i have experienced your website and i am a loyal customer of yours'.. there are things which are common for quads n others but still there are things which are specific to planes etc.

Ohh true quadkopters stock only products which are specific for multirotors (hence name) for other stuffs i refer my customers to other lhs and now would refer them to chintal (except multirotor products :giggle: )

India's cheapest rc store Rcmumbai.com while keeping quality intact......

Rcmumbai will have verity of electronics combo, rtf, pnf, built it or self, 3d profile kitts, ubbreakable microlight Kitts,indoor kitts ,scale ARF and pnf and various combos in our site. All kits will be made in my factory.also epo foam sheet and blocks specially made for aero modelling will be listed.

Airplane Kitts will be cheapest rate in India, it will be challenge for market.

a 4 channel  radio,cheapest possible price , coming up soon......

Happy Flying

Regards
Chintal
Rcmumbai.com

Do you have ultralight kit? please post its dimensions

Orange DIY moduel and orange rx.... to convert any fm radio to 2.4ghz.... :)

@topalle.   We have micro light aircraft kits.

website please

as soon as possible
its almost ready
took way too long........(taang mat kheechna)

Do you have tx lipo? Turnigy 2.65 11.1V??

Nope

planning to get it?

how many do you need ?

2 pcs

I am not sure about how long will it take but looking for anything specific ?

I want lipo for my transmitters (9x and taranis)

Will let u know once in stock

Do you have DJI Naza Lite in stock? If yes price shipped to delhi
Regards

10100 + shipping ₹100
Product will be in stock within 10-15 days

One more suggestion please bring glow engines of .46 and also it's fuel

What happened to your website.

Tonight it will be online
Its ready

Thats Great !  :thumbsup:
Please let me know as soon as stock get into your store.

Waiting for your store to be online ..
few pals left.. :)

Please give an option to ship by speedpost also...

Only dtdc as of now
Ems is not allowing to ship electronics they open every parcel and check

Any high discharge batteries available???
4 cell 5000 mah 35 c

4s 5000mah wild scorpion 30 c lipo will be in stock shortly

do any one provide me Turnigy 9XR Aluminum Carrying Case plz

wow... your website is awesome...

Website is awesome just one suggestion change the logo to a better one.

transmitters section is not working

I have not added transmitters in the product list topalle sir thats the reason

@nitesh thanks for the comments
Thats not my logo
It will be changed to rcmumbai's soon

You can add more items like DJI product.