Lipo charge pack


Lipo charge pack

Protect your family and home from the hazard of lipo charging.
This lipo-guard is a fireproof bag, designed to stop and contain the fire caused by incorrectly or poorly functioning lipos, especially during charging.
We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended.

The LP-Guard is made from a fibreglass woven fabric. Similar to fireproof suits worn by some firefighters.
Type: 18x22cm Sack
THS

Very expensive!

http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=102_94&products_id=919

http://www.rcbazaar.com/products/394-high-quality-lipo-safe-bag-m.aspx

Pankaj Please Respond...... 

Its been 4 Days since i placed order and made payment, still the status on the website stays as Unpaid. Also i have been to contact you (Pankaj) @ 08891331831 and no response there are more than 30 Full calls ringing at your cell at various time of day and yet no response.

Please Dude Respond getting a bit apprehensive here   


- Ayush
09352717410

Hey ayush bro don't worry, be patience. Pankaj sir is good person. I think they have schedule with courier service so you will get your item shipped soon.

I really wonder should the lipo's be placed in a bag while charging? I mean what about all the heat thats generated, I would rather think of keeping it in open. I might be wrong not 100% sure about this....

All the heat generated is contained by the LiPo bag. I think you missed reading the fact (in #75) that it is made of fibreglass woven fabric (similar to fireproof suits).

@swapnil .... quite possible sir i might have misunderstood. 

Same is the case with me here. I ordered two servos on 2nd and requested him to ship the servos on 3rd as I would be making the transfer on 3rd, which I did.  As of today, I have not received any shipping details in spite of sending couple of emails. This is really disappointing communication and service. I would caution anybody from making purchases here.

Hello Vishal sir,
                           It is already mentioned in the site that order will be shipped within 3 working days of receiving payment.
You order was already updated with status(payment received, processing) on 2nd april when we received the payment.Order will be shipped
on 7th april as 5 &6 are national holidays.

Thanks for Contacting TheHobbyShop Support.
www.thehobbyshop.in
Support email support@thehobbyshop.in
Contact:+91-8891331831

Pankaj, I really don't mind if the shipping gets delayed by a day or two, however, when customer emails get unanswered, it doesn't send good signals.

BTW, my order is showing the status as Pending, (Payment not received) on 2nd April. Attaching screenshot.

9Ch 2.4GhzTurnigy tx w/ Module & 8ch Rx (MODE 2) V2 @ 5800 

Stock Available for 9X.Both Mode 1 &2 .

Battery for 9X @ 830 

book mode 2 for me . . .

sent pm

Hi Pankaj,

The Tx which you sold me is giving some problem like when I got to Menu to change the reverse or throttle set up changes ,the system hangs & does not operate ?

Pls can you check & advise on this problem.

I've no alternative than to switch off & switch on the TX but still the problem stays after I go to MENU - SETTING --MENU--(PROBLEM START WHEN IM IN ETHER OF THESE SETTING (REVERSE ,SUB TRIM OR CE.POINT ETC)

any solution or reset button

Regards
Peter

---

Moderator Note: Unnecessary quote removed.

Hi Pankaj,

Awaiting for yr reply.

Dear Guys,

Have you'll come across such a problem ? if yes any solutions.

regards
Peter

@peter.gnomes is your issue solved, i want to get the stuff from them but want to be sure.

Hi Pankaj,


This is the 3rd mail but no reply,pls can you advise on below

regards
Peter

Hello Peter Sir,
                    I have not been active on RCindia Recently.You should have sent a mail to support@thehobbyshop.in . Anyways if the problem is not resolved please send the 9X back to us and we will send you a new piece.

Thanks.

Accucell and 220vac Lipo chargers added to stock.
http://thehobbyshop.in/index.php?main_page=index&cPath=7

THS

9X white backlight kit (DIY) added.
Brushed ESC 20A added.

Complete list of new arrivals can be checked here

Enjoy our 24 hour shipping on all orders.

Dear Pankaj,

Thanks for yor reply, I too was not well all these days,

Can you give me complete postal address /tel no contact person to send this TX .

Do you want the Rx also ,pls advise.

regards
Peter   

Hello Peter Sir,
                     We only replace items which are DOA(Dead On Arrival).Please do NOT send the radio back to us.

"Hello Peter Sir,
                    I have not been active on RCindia Recently.You should have sent a mail to support@thehobbyshop.in . Anyways if the problem is not resolved please send the 9X back to us and we will send you a new piece.

Thanks.
=============================================================
Hello Pankaj,

your previous mail tell me to Send the 9X back to us & we will send you a new piece ,Today yr mail says no dont send it.
What exactly are you trying to tell ,now not to send the TX which is faulty from Day 1 on receipt of the TX & now you mention that " We only replace items which are DOA(Dead On Arrival).Please do NOT send the radio back to us. "

I've also asked you whether this is the old version of Turnigy TX which was having many programming problem & you confirmed the 9X is of the latest v2 version then why was I facing so many problem ,if you re-collect I been following up with you several time via phone regarding this problem & you have not called me even once.Beside this, this order was placed for TX/RX along with backlight but the backlight never came along with the TX even though I paid for full.


I know this much that the product you sold me is faulty/defective  & the same is in warranty .Therefore send me Good problem free 9X  & reply to my mail (address /tel/contact person & if you cant do this then pls refund the money.



regards Peter

@ Peter sir
                  You have never E-MAILED us regarding you problem . BTW I have sent you a mail on 4 july regarding what can be done.

Thanks

Hello Rcindians ,
                         It's time to reuse those motors which were useless without the grub screw. Grab some Alloy M3x3 Grub Screw(5 pcs/Set) (3mm dia. &3mm length) from THS (45 rs. for 5pcs.).



THS