RC India

Good evening Friends...i am Rathikrishna, younger sister of Mr Roopesh Krishna, and, already, he has a profile here, but unfortunately, now he is in bed, due to a road accident,with a spinal injury.so i am posting all of my works here, for him,because he was my teacher, in electronics, and modelmaking. since, i was making all models with his guidance and advice.i was posting all of my works in reputed forums, so i got many requests and advices to join here and post.i hope i will get ample of ideas from you all, and hope again, my works will inspire you...so i have a request to you all...plesae pray for my brother once...for a nice recovery...i am not a newbe, in modelmaking, was making models from age of 8,with my brother. now i am a professional in aviation field...my much interest is to all modeling categories..still i love waterbased crafts, as they have a good realism in life...so this is my dedication to my brother, and all you know his interest and dedication in to model making...with great hope...Rathikrishna

Hey Rathikrishna,

Welcome to RcIndia. I wish your brother an extreme speed recovery.

Am sure folks here will help you in every way possible.

Take care..

Thank you Atul...thanks for the prayer...and wishes...god may help us...

Hi Rathikrishna
 Welcome to RC India. I think you are a boat modeller.If yes please help us .

Ved..i am in to everything...aero,boats, ships, cars, trains, tanks,architectural...anything...and i hope i will get many ideas from you all...i am younger sister , of Mr roopeshkrishna you may know him, by his contributions...

Welcome to RC India :)  Great to see your accomplishments.

I hope the gentleman from the US who was looking for models builders was able to get in touch with Roopesh or you, in a mutually beneficial manner.

Also, if you can disclose, please let us all know how serious Roopesh's injury is, and how soon he will recover fully.

I hope he gets well soon and want to see him back,up on his feet.

Good morning...and Anwar,i hope you may know him personaly..he was taking classes and conducting exibitions all over our land..on the time of that accident, he was in a duty with Naval base, Cochin,for the training of cadets, in to paragliding...so after the programme he was heading back to home, while their jep ran over a divider, because of a drunken driver..in that moment, he felt nothing and came back home...then a back pain starts..even then he tried in gymnasium, as his annual body show was arriving...then he trained with heavy weights...after few days he was in bed...he lost three of his spinal discs..was in hospital around an year..and within that time, his wife left him, in his bed, as he wasnt rich enough, because his idea of life was to serve his country..she is a greedy woman..so our elder siblings are too busy with their jobs..so i came home..and now he is in some recovery..now can stand, walk a little..and being with me, for making models..so this is my immense effort to energize him, back in to life...so i always saves all webpages, from MBMH, and now from here, to show him at home..by the positive responses he is feeling well...i hope he will join us soon..so please pray for us once..we need him, because he is an extra ordinary..with his ideas...

 :salute:    :bow:

Sad to hear the family part :(  Hope he recovers soon, our prayers are with him.

PS: Requesting others NOT to comment about the family part further.

thank you Anwar...

Welcome Aboard Rathi. Great to be connected with such talent here. Awesome models!!!!
Wish Roopesh a speedy Recovery.

Shreekant

thank you all..i hope i can meet you all in an event...happy...

WOW....Finally a girl has joined the RC Family, Rathi, your knowledge is amazing, all your models I have seen so far on the forum are far better than those ready made kits available. Wish to meet you sometime and learn model making and share your knowledgebase.

Kudos to you...!!! I am an instant fan seeing the 3 boats & your home made ESC you have shown so far on this forum....god damn amazing...!!! I can just go on saying amazing & awesome a million times....  :bow:  :bow:  :bow:

welcome aboard. gr8 work. will pray for your bro's speedy recovery

I will be in Kerala on or around the 12th of Feb. Would be grateful if you let me have your address so that I may drop in and meet your brother and you.

Regards,

VC

sure..i ill send you a PM...

Hi Rathi,can u post a video of how u modified a toy motor for ur applications? Thank you.

Sad to hear...  He will get well soon.

we all pray for recovery of your brother.

Good morning all..and thank you all...friends..i was posting all of my efforts in many international websites and forums...and now i came here because of the advice from, my brother and friends..so i hope my postings may inspire you all, to make ample of crafts from things around us...all we things about expensive and complicated equipments for our hobby...to me its not a mere hobby but its my life..all you can see in my postings, its simple and effective..i do not have any brushless motors with me and ESCs..still i won the gold medal, even for last year..and choosed as the "modeller of the year" in naval competition..so it proves we do not need any complicated and expensive things to make crafts...still i know thousands of our friends are keeping distance from RC hobby, because of the high cost of the materials..so i request you all, please start from thermocol..its easy and effective and lasts for alife time..here i need only a 200/- Rs for a craft...and if i look for a balsa kit, it will be more than 2500/- Rs..still i cant finish to my degree..so try it..and make ample of crafts...

and sure i will post all of my good efforts here one by one..it will take a little time as i am living alone and no one to help...but i will..sure...so first of all i have to break a code..its nothing but about a brushles motor..now i am on its work..make a brushles motor from a cpu fan..all along with a home made speed controller ...so all you will say..how simple it is...so i can show you that the knowledge is not a monoply of anyone...its will be based on a cheap LED chaser...wait a little..and with that motor i will make a craft for you...hi...hi...and sure i will show you how to alter a toy motor for our needs...its amazing..and none of my crafts are equipped with any costlier motors....but all toy motors..reworked..result...all you can see in my videos...all based within 7.2 volts max..and 700 Mamps...hours of running time...and power..so dont wander behind many complicated stuffs...its a kind request...Rathi

 ??? somethings don't add up

Some?  LOTS, in my opinion!

???

you know what rathi, our forum has a guy called KALYANPRODHAN, (Your MBMH, friend as well) he can beat anyone hollow on (a) electronics (b) making RC stuff out of nothing.. can rally cause Mayhem, if you know what i mean.

Very helpful and humble as well

+1 augustinev

I am pretty sure we are all confused by the hight-lighted part above :headscatch:  I am sure you know about how widely electric motors are used these days for aeromodels... in fact we have two whole sections for them :

http://www.rcindia.org/electric-planes/

http://www.rcindia.org/electric-power/

I am sure it is a "lost in translation" issue, would still like you know what you really meant ! :)

Anwar bhai,

On the lighter note, caught Admin with Lost in translation on :headscatch:

Don't correct it for the fun of it

I was using the "Quick Reply" box, and typed in the emoticon/smiley text instead of clicking on an icon using "Reply" :)  Yes, I am not changing it !

rachu/rathi

also, could you throw some light on use of camera and photoshop as well, i believe you are a good photographer also ;D

Anwar, its true..to me , making a flying aeromodel with electric motor is childish...and i was making models from age of 8, and was flying aeromodels from age of 14...and i got even more great chances, on it, as i entered in research in aeronautics, especially in Avionics...as a real pilot, i know that, aircraft is, an extreme machine, and it must be powered with a IC engine...because, even now, there is no option to beat an IC engined plane...an aircraft must be powerful, means RAW powerful,and we must be capable of taming it with our hands...when i see an electric plane or a electric heli, its too sad...and only gives us a little flight time...and 99% of electric crafts are too weightless...and i know, a weight less carft will be more suseptible to winds...i have many electric planes and helis, with me, and yes with IC engines from Hirobo...but i hate electric...only in aeromodeling...i feel it like playing with arubber band glider...but when i starts my SCOOBY, with 4.5 cc engine, from OS, its a different story...when  it passes my overhead with a WROOOOMMM roar, in a slope pull, its goose fleshing...we can go for electric planes at begining, and yes many companies are promoting electric flyers, because of, the ease of use, and restriction, in some countries and areas, to use IC engined planes...

Anwar, as an aeromodel instructor, and a pilot, i have only one word in aeromodeling, that , TO ME, an electric plane or heli is a TOY...no thrills..frills...no wroom...i always feel the sheer power of my crafts when i fly it...a heavy weight plane with a super powered engine is no match for an electric...because we all always see it in our competitions...and i was making ample of crafts with my own idea, as INDEPENDANT ENGINE CONTROL, for starboard, and port engine, thus avoiding the use of rudder...and designing more...nowadays IC engines are more easier to operate, and less priced...and yes tidy..we got a new batch of engines from OS, and it all are nice..easy to start...and yes..immensly powerfull...and yes , i am here only for SHIP, AND BOAT modelling, because, i cant use any of my aeromodels at home or in our maidaan...and its far messy, and unrealistic in nature...so i started making water based crafts..its true in nature, al in scale, and simple to operate...with a 6 volt battery, and reworked toy motor, its all enough for me...working nicely...and all of us consider the brushless as a miracle...its not..because of the fun making on me, by last night, i have compleated my brushless from a scraped CPU fan..and will post it by tomorrow..a brushless is nothing...but all of us spending a lots of money on it...for Chinese, cheap brushless with lipo batteries from the cottage industries of China..

Pardon me, if you feel electric engined models are "childish" that is your opinion and you are allowed to state it here. In a similar way, many may feel that making boats out of thermocole which are not made to 'exact scale' is also "childish". It is a matter of perception.

Well said VC sir. {:)}

In R/C cars,electrics beat nitros regularly.

and yes a cheap brushless will be with less quality magnets, as it losses its property while heated up..so when compared to a brushed motor from companies like Mabuchi, or Johnson,a cheap brushless is far inferior..and yes a powerful IC engined air plane is not meant for a soft heart, but it needs a nerve of steel...so have some nice yummy crafts...with IC engines...single cylinder..twin cylinder..sleeve valve...and yes WRRROOOOMMMM......and BOOOOMMMMM......hats off....

sir..its all to ME...only..and yes i am making all models from scratch, and boats from thermocol, because, its easy to work and all it is in exact scale...and lasts a life time...

and yes..elactrics may beat..but you must consider the cc and gear ratio when compared...a twin cylinder IC engine is a matchless...as i know..and still working on it...

The cheap brushless motors like the ones from EZrun are right up there with the ones from big brands.As far as they have a sintered neodymium magnet on the rotor,they're good to go.

For example,get a castle creations Mamba monster 2200Kv motor,power it up with a 6s lipo and see if it beats a twin cylinder engine. >:D

NO...i am researching in this subject, because we need it in our works at Avionics...i will give you some motors as brushless, if you are willing, and it will costs more than 75000/- Rs..and you can compare it with dynamometer, while with Ammeter,in a same given voltage...then you will see, at load, as motor heats up...the cheap one will give up...

I don't have a clue as to who you are calling 'soft hearted' or lacking 'nerves of steel', but right now, there is a combat pilot and instructor reading your posts. He is an avid electric modeller. I don't think he lacks nerves of steel! :giggle:

You must be an awesome person - day by day, we are learning more and more about your ground breaking feats. You are associated with the Air Force, doing research in weapon systems, you are a pilot, you are an aeromodelling instructor, you have won gold medals for your models, you have more than 700 models in your collection and now you also have Hirobos. Awesome, as I said! I thought people like you existed only in very fertile imaginative minds. :bow:

I am speaking about R/C.

Whatever.I worship :bow: electric power and will convert people to my side. :giggle:

Sir..now i am sorry with you...

and leave my matter here...but you can look up at my brother, just once, and he is far beyond me...so, you can see many of his interviews in many channels include NGC, Discovery, and yes all our channels with his works...so happy...i am his siter..and far below him...so sorry with you...

Rathi,

I want to be as forth coming as possible and like i told anwar bhai ready to eat humble pie any time. Firstly, wind effect on an aircraft has nothing to do with weight.
DCA=SIN to the -1 [(V/TAS)SIN (W-TC)]

DCA=Drift Correction Error
V=Wind Velocity
TAS=True Airspeed
W=Wind Direction
TC=True Course

where is weight this, it is only the forward speed, sounds impossible but true, a huge passenger jet which lands at low speed has tremendous problem of landing, controlling, turbulence effect and what not, a fighter jet especially mig series , we don't cater for wind at all. I have flown thousands of hours and i am telling you.

Your last two posts are addressed to whom? Pl clarify.

Could you also please provide the links for the 'Interviews of Mr. Roopesh' by Nat Geo (NGC??) and Discovery? I have not been able to find them.

Thanks.

yes you are true..but here, we have a heavy winds...its almost impossible to fly...crashes...but when i turn to my craft with IC engine with a heavy weight, its not a matter...we cant take the actual criteria here, because all we know, we are reducing the scale to our crafts but not to air molecules...and i know, there is no problem with a head wind, or cross wind, while we fly a real craft at high speeds...

Roopesh,

let me tell you something, please, please think about it. I reported to duty way back in eighties to my boss. fresh into combat flying etc, my CO tossed me a coin and asked me to read what is written there, i read and it said "Satyameva jayate", truth alone triumphs, i carried it with me since then, you know Who is ones biggest enemy ? oneself. Pride, ahamkara. Be truthful and Humble. come clean . to err is human. i can talk for myself. you would have risen in my eyes.

You have been caught my friend. Bravo WingCo you belled the cat.

Aug..sticking on to IC engined craft is not an ahamkara...its my option...my experience...and all it are true...nice...but still i use electric motors on my water based crafts...its nice...

Bolted as the noose was being tightened. It is time we explained to the forum...................

Since you are from my land of gods, let me give a Thirukural from next door.
தொட்டனைத் தூறும் மணற்கேணி மாந்தர்க்குக் கற்றனைத் தூறும் அறிவு.
Water will flow from a well in the sand in proportion to the depth to which it is dug, and knowledge will flow from a man in proportion to his learning.

You have been told time and again, you are good by people around you, ask yourself, who are those people ? your efforts needs to be recogonised by Whos Who of the field, please do not let it go to your head, there are some real genius who have worked relentlessly, yet been humble out there, they are your inspiration, not yourself,

we are nothing but Shadows and Dust. Please humble yourself. please, an elder brotherly advice

Ashta Sirs name springs to mind.

come off it Roopesh, please, we are not some MBMH guys, over some time you will realize we know each other and speak to each other, interact, fly together guys, welcome to this scaffold , come clean, one sorry, is good enough , it will be a forgotten story, slate wiped clean

He is right Roopesh, Be bold and be yourself.. Join the team

Roopesh, you are a BRILLIANT modeller and we are all proud to have you with us.

i am new to RC . you people are doing RC related things when i was not even born  ;D. in older times brushless motors were not there they came and then came LIPO's  >:D .
in todays scenario i guess brushless motor come cheap(HK  :bow:) and powerful {as low as 65watts/1$  :thumbsup: } .the brushless motors are certainly not TOUGH and ABUSE TAKING like huge brushed and engines .....
but come on they are the future ...aren't they  :-[
I have purchased a motor and modifying an ESC to make  "A RELIABLE 2HP POWER SYSTEM" in approx 200$.
reliable means RELIABLE.

and talking about gear reduction it is more necessary in engines (25000 rpm :giggle:) than in brushless motors (5-6000 rpm :thumbsup: ).

Pankaj, please do not stray from the current topic. Follow the thread, there is a much larger issue being discussed. RATHI KRISHNA IS A FAKE. THERE IS NO ONE CALLED RATHI KRISHNA ON THIS FORUM. ALL THESE POSTS WERE BEING DONE BY ROOPESH KEEREEYAT UNDER A FALSE IDENTITY.

Sorry for the caps, but enough is enough!

i was on topic i guess about the gear reduction and insult of brushless  :giggle: :giggle: 

and i have no idea about FAKENESS on her holiness ms. rathikrishna.....

well i have now.  >:D

I had my doubts about this person for a long time. If you watch his interview on the Kairali channel (youtube) his USP is given as a scratchbuilder  of model aircraft out of waste products. I had questioned it at that point, but not too forcefully. I had even penned out my doubts to Anwar Sahab. I have been into scratch and plastic kit building for over 30 years now and have a fair idea of what a kit looks like. I saw that the majority of his so called scratch built models were actually kits.

I say we all take a long breath !

The moment one says only scratch building is worthwhile ("non-childish", if I may borrow the terminology used recently), I would lose respect for the person. If someone said great flying is what matters, and building (scratch/kit/whatever) is a waste of time, then also the person who makes such a statement will lose my respect.  

What part of this hobby is of interest AND VALUE to anyone is a strictly personal matter.  It is pretty similar to how someone decides what kind of car one wants to buy... is it for the beauty, or is it for comfort, or is it for fuel economy, or it for sheer power ?  Everyone has a ranking for these factors, and NO ONE can say one reason is STRICTLY inferior to another.  The same analogy can be used for why one finds/decides on his better half... and so on.

So I would say it is a mark of maturity to be open minded about the various aspects of this hobby.  Some people love flying alone...  the best scratch builder can only dream about flying like a true pro.... and vice versa.  I know it takes years of stick time to fly like some of the best, which is not much different from scratch building. Both take patience, and perseverance.

I would strongly suggest that everyone should appreciate what others are doing on the various aspects of this hobby, and not TRIVIALIZE anything.

Regarding electric versus glow/fuel, the debate has been settled many times before that glow makes sense in bigger/heavier models, and electrics would win on the smaller ones. I would consider it lack of experience if someone claimed that electric models cannot handle wind, and I leave my comment at that (as I doubt my own experience/qualification when it comes to such discussions).

I would also request the people who are casting doubt on the models being built, to inspect them in person before making specific comments about the same.

What caught my attention after I joined the modelboatmayhem forum is the fact that Rathi Krishna made a huge hue and cry about being born in impoverished India where she, as a woman was oppressed. 'The nearest cyber parlour is 30kms away.' She stressed on this point time and again. So saying, she would ensure that her last post at that time was always around 19:30 hours, no later. An 'oppressed' woman in a rural environment cannot stay out later than that. So far so good. However, she neglected to hide her tracks here. I found out that this person was most active on our forum between the hours of 23:00 hrs and 02:00 hours! How did she manage to find a cyber parlour at those hours? This set off a string of surmises and deductions and things started to slowly fall in place

Finally, when I was sure that we could nail him, I got in touch with Anwar Sahab and WingCo Augustine last evening. The results are here for all to see.

Whoever this person is, he is a dedicated modeller and in some ways ingenious! No one can take that away. It's a pity that such a person has to hide behind false identities and subterfuges. I, for one, hope this will end well and we can all learn from him soon.

Lot's of 007 work Vc  :salute:

Santhosh, Sir Arthur Conan Doyle always inspired me, however, your salute is better deserved by the Wing Commander who dared to be upfront about it.

The posts on modelboatmayhem are outrageous! Here is an example: "..and i need my MOM to feed me, and yes my buttocks will swell as her arms falls on my buttocks..with anger." A 37 year old woman being physically thrashed????

 "i have four radio systems, with me, but i never used it, because i know, such equipments are priceless treassures for me.all four are in its packings with my dresses in my wardrobe.to people like you it may be some needed things but to me its a rare and far beyond reach, not because of the money, but lack of market and because of the restriction of my gender.." Gender biasin India being played out in style for an International gallery of sympathisers who are delighted to see their stereotyped ideas about India being translated into reality!

Then the mess up - "second aspect is, related to my health, due to an accident, happend when i was 16..i was too interested in off road bikes, since my child hood...so because of my extreame pressure my Papa, imported a off road bike for me from Suzuki, was a 224 cc two stroke one , and i started riding it all over our farmyards..as time passed, i saw some great action in TV shows, and because of my ignorance i secretly tried it..and after some sorties my bike hits a coconut tree with violent speed as i lost my control..the final result was too bad as i can remember only a yellow light as i aproach the tree...put it briefly the crushed handle bar penetrated in to my stomach, thus i lost my uterus, and some length of small intestine..so how can i marry one..?..so i am too happy that still i am a virgin...but my Mom is too sad, because she couldnt save me as she is a gyenecologist.." So the oppressed woman goes about riding an imported Suzuki 224cc (???) doing stunts in a village. :giggle:

There are several more gems including dressing up as a woman in a saree and wearing false nails and heavy gold jewellery. The face is NEVER shown, as 'SHE' is not allowed by her Papa!  ;D

^^^ :o :o


I never thought that this thread would go this way!Great detective work VC sir and Wing Commander Augustinev.

No idea why we had false identities being used and so on.

“The hair is real; it's the head that's fake”

VC bhai -  Although I can clearly see your reasons for posting the above information, I am not sure such personal details should be discussed in public. I would request you to send the same to the affected party via PM, and post only "a summary of the outcome" here.

Please note that I am not taking sides either way here, I do respect the sanctity of individuals. If you decide to leave it as it is, I will respect your decision too.

Too many lies and he lost track :

Posted on 24th Dec 2010 - '...after a horrible accident at 18 years.so my Maa always concern about my health...when i am at duty she will make 6 or 7 calls at least a day...so how can i hate my Pappa and Maa..?'

Now the accident was at 18 years age and not 16.

MJ SIR and VC SIR......seriously you people should be working for the INDIAN INTELLIGENCE some thing like RAW

Anwar Sahab, I understand your position as the Administrator. However, what about my position and MY dedication to this hobby for the last 35 years??? Why should I stay silent and watch some twisted mind make a mockery of my hobby and more importantly MY COUNTRY? It is unpardonable. This guy belongs in an assylum.

I had warned you about this person more than six months ago, didn't I? Why can't some other members of this forum also be given their due recognition? I feel rather strongly about what I am seeing at RCIndia nowadays. You want me to stop posting. So be it.

And as far as discussing personal details on a public forum is concerned, I didn't start it. Someone else did, internationally - Spinal injury, uterus removal, broken marriage, physical abuse at the age of 37 et al.

I only requested not to post personal details. And I don't think anyone who deserves to be recognized has not received it.

I don't want this thread to look like a personal ego issue between two static modellers, if that is not clear, I will not comment further. I would suggest rational thinking at times of crises.

I am most worried about this being projected as an example of the famous "crab mentality" attributed to our countrymen :(

PS:  "You want me to stop posting" ??? Where did that come from, even after my making it explicitly clear "I will respect your decision (to post)" ? If people can't think straight under duress, please don't take it on me.  I have better things to do with my time, than deal with such occasional outbursts of people I still respect !

Just want to say one thing to the culprit     GET WELL SOON

Dont fight Guys... :) All is well... All is well  :)

VC
i understand your anger and the love for the Forum, the fact is , cornered, even a rat fights for its life must give an honorable exit out of the situation, so that the person has the opportunity to come clean, i agree with anwar bhai on this issue. who is not impudent these days? you and me inclusive. forgive. don't forget a static modeler like him is a big value addition to our forum. he will benefit, we will benefit too, like anwar bhai says, lot of young people are following this thread. they need to take away the message of truth, forgiveness and humility from this thread. thanks, your call

true...  :bow:

◄▬ (on the lighter note) that's me scuba diving, that was my deep dive session.

I have no hesitation in admitting that this person is a far far more accomplished modeller than I am, any day! Even if his so called 'scratchbuilt' models are plastic kits, they have been modelled to a very high finish. Perhaps, even better than mine. No Sir, that is not the issue at all. The issue is why all this drama? For what purpose? Everyone can see his is brilliant and deserves our respect. Why is he doing all this? That's all.

relax guys take it a couple of notches down. ;D

I, for one, shall be very unhappy if this causes Mr. Roopesh (Not really sure if that is his name now) to leave the forum. I hope he has the guts to come back and help us learn from him.

I did what I had to do. Just couldn't sit back and watch this surreal drama unfold. Blame it on my lack of humility and maturity.

That, I hope, is my last word on this subject. Wing Co, thank you for your support.

Cheers!

To all forum members.

nice reference from Thirukkural.  :thumbsup:

Just went through the whole post..lot of -ve things going on on RC India. Hope everything ends well. Chill guys please...lets concentrate on why we are here at this forum...RC modelling  :thumbsup:

^^^totally agree. {:)}

Enough of the negativity.

Not really... what ever is the story behind this thread, the last few days have seen a lot of great threads on this forum, outside of the commercial stuff.  From the back-packable glider to electro-mechanical speed controller, these few days have been one of the most satisfying periods on this forum in my account.

It is true that there is some conflict, but it only shows that we are a vigilant and vocal group, who cannot be easily duped.  The radio for sale thread also serves as a warning to anyone who wants to mess with the wit of this audience ! 

Overall, "everything happens for the best" :)

B+

Nothing but coincidence... that is my blood group :giggle:

mine too, co-incidence ?

Mine too Biraader!

Augustine, Anwar, Vikramaditya ----

Beginning to sound like John, Jaani, Janardan!!!

Just wanted you guys to see this thread..Have no intention of igniting the fire again..peace..

http://www.modelboatmayhem.co.uk/forum/index.php?topic=27856.0

http://www.rcgroups.com/forums/showthread.php?t=1360894

Now tell me - do you guys also have a birthmark shaped like the deflated rear end of an emaciated elephant below your left armpit?  ;D

Clearly shown in your blood group :).  I totally agree with you Anwar on the last line. Life is an experience we have to go through and learn from it. And take all the positives with us and leave the negatives behind.

Regards
Ankur

MINE TOOO    8) 8)

Atul that is from where it all started, but I choose not to comment on this any more, unless you are seeking some clarifications.

Cheers :D

How did I miss this,
thanks to him, here is the new thread
http://www.rcindia.org/chatter-zone/propulsion-controlled-aircraft/new/#new

augustinev have confused me and when I got the Phone at about 7:30 of saterday, the sound was cuts into pieces. Just like you double the frequency and cuttng into pieces to maintain the audio meaning. (Making frequency double and then split and spraid to make the time from half to Full).

My first & sudden reply was "Hello, I can't here properly, Sounds like Digital Voice ."

The Phone cuts and again rang and the query about a radio. But the other party (?) just completed the phone telling loss of signal. The cheapest Servo control from control Pulses (Tx+Rx) are remain unresolved. (First & Last Phone Call).

The entire sunday not gone to forum and starts reading, modeling in multisim, Calculating and after 1.30PM, starts making an Glider. At 8.PM view Film and then making an 25 watt LED array light (Dinner in middle). Again completing, enter here, and seeing all this. ???

As I have invited her (?) :banghead:, I have requested AnwarSir too, but at that time no response/feedback. As the postings are about exploring very basic idea from India but posted in Uk. and as I have pinpointed in Electronics knowledge, Other things being unnoticed to me.

Again, when yesterday when augustinev dial me, I have her number, but 50/50 chance from my point of view, and as per request, I cannot give it, just informed that she give the number by PM.   ;)  (Admin has right to check PM and augustinev told me that he has talked with Anwar(Admin, However, Admin is 1st member and Anwer is 2nd).

Then I again PM Anwar to talk but fruitless.

Now, entering at here, seeing all this. However, thanks VC and augustinev for their byomkesh bakshy type work (Not only Detective but also truth Finder).

However, all his/her post answered several things and I am sure that the person has clear and vast knowledge about the Electronics item found in spare market like Radio TV Technician. Yes, we dont bother those as we can manage various Electronics equipment/component from suppliers of Jadavpur / BE&SU / Rajabazar Science College but for mass production and immediate start, commonly available items are required and here I got the info in posting.

Again one confution, How the person use common enamel paint directly over thermocol ?. need no Answer now.

However, for taking rest, going to bed to start a new week. But I got the idea to make 26 (Twenty Six ) individual analog channel Tx+Rx & Esc too. & you can make your Rx within Rs. 250/- complete, that can work with your existing FM Tx.

However, sorry from my side as I think only the good of this forum & invited.

Thanks

???

Kalyan - Your entire post is a fairly confusing due to what seems like lack of complete sentences :(

In any case, I (and others) have a full open mind about this whole thing.  My job as an admin is to "moderate"; in essence, act as a "middle voice", so I was waiting for answers to questions posed already by me and others. I am sure Rathi/Roopesh can answer the concerns raised, and we all can move along with what we love best.  Everyone here (including Augustinev and VC) has publicly stated their admiration for the work presented.

I do not think the opinions of Augustinev and VC display a lack of open mindedness. Rather the opposite. I had also expressed my reservations to you via PM. Unfortunately I have not been with access to my computer (no , I do not have to travel 30 kMs to a cyber cafe!),  to chip in during the fireworks display over the weekend.

As far as I am concerned, There is no debate from my side on his/her model building ability as I don't really know. But it does gall when ANYONE sprouts "gyan" in an authoritative manner assuming that it will be taken as gospel. Purported facts/data are not the same as subjective opinions.

And our (Augustine and mine) antennae went up with many, inherent, contradictions. This is the first thing one looks at in establishing credibility. And that word is the real issue and  the key to everything on this thread. This person rates (-)100 on this count for, at least, the three of us. So it then becomes very difficult, if not impossible, to separate fact from fiction.

Sure there is a question of credibility, I had asked the question about electrics versus glow for the same reason. 

Most importantly, when anyone says "I know everything" or "I have done it all" or "I know best" (even if all these are actually true), the immediate reaction of anyone (especially who do not know them well) is to distrust.  Seems like a lot of people miss this important point.

In any case, there is some clarification that is long due !  The hours of posting, all the photoshopping etc (without getting into the personal stuff).  Even though no one is compelled to do anything here, it would go a long way in establishing that all important factor of "credibility".

How very true, there is light at the end of the tunnel. hold your horses

On this "I know everything" and "I know it all" there is something that I noticed. This tone was exercised only on this forum. On the other one, populated by members of the Western world, the tone was humility personified. There it is more like "I am no one and I know nothing - you are Gods and Goddesses and I am ever so grateful to you that you acknowledge my existence."

Shakespeare, I think, had a nice phrase for it in Julius Caesar - 'Low-crooked court'sies and base spaniel-fawning'.

Shouldn't we be able to 'Forgive and Forget' , brush it off as Juvenile delinquency !!, able to accept him back, if he comes upfront and accepts his error?

Good evening friends...its too hard, that things are going in an extreame, here, so, its time to say, to all of you, that , i am Roopesh keeriyaatt,not Rathikrishna, yes was posting in this name, because , all you know, actually, i was posting all of my ideas here and every where that possible, but there wasnt any response...then, as a fun i started posting my ideas in to a woman's name and profile...the result was amazing...hi...hi...Friends, all you may think i am a false prouded one...or a good for nothing...but, my effort starts in 1992, to serve my country...my ambition was to be a fighter pilot...but in that time, i was living alone, from my child hood, as my father expired when i was 10...so all of my efforts was wasted...still i worked hard to live...but my idea was to serve my nation...because i know, that god gave me an astonishing gift....so i started wandering all over my country, to geat any hope from any door, in to deffence...but i was kicked out from all doors, why, because i am not holding a valuable certificate in my hand...and i wasnt rich enough to buy a certificate, by paying 3 or 4 lacks here...still i continued my wandering through all over my country...i slept, in Bangalore town, in a varandhah of a shop, in Kalassipalyam, for many nights, to cantact some persons in HAL, or NAL...as i told my ideas to the gate security personal,they grabed me and throws me out...and laughed at me...it was too painful to me...and yes still i was realizing that our soldiers are dying in borders to protect us here...we all living inside the country, because many brave persons, who, keeps our nation, in peace by giving their life...

so all we enjoys our freedom, and we drinks, plays, quarrels, in the form of religion, caste, politics...etc...etc...so i was living in a great pain, that, all of my ideas were lost in vain...so i started my own research, in aeronautics, around 1998, and spend all of my life with it...and designed many things for my nation...but none of them was realized, so all of my effort was in vain...in between, i got a chance to join in army, and as a body builder and as a martial artist i was too fit for it..but one of my teeth holds a hole, by careers, so i was rejected....still i begged to that officer with my ideas..so, he laughed at me...i know, it was too easy to fix a tooth problem, but i do not have any money, with me in that time, to carry out a root canal...so , yes therewasnt any time to make money, by working...so, i was living for my nation, by body and mind, actually, i was living in a world, a dream world, of an army, to my nation, one holds all, airforce, infantry, navy...and all...there all weapons were sophisticated...well proved...and all of our brave soldiers were well protected and cared...by position, and by equipments...so from my dreams, i made many ideas, and submitted in many places...but there wasnt any response..and i continued...then some one will come, and alks..then...vanishes...i born in this country...and living as a proud Indian...so i hope, before my last breath, i hope, i can do some thing to my nation...so my life is dedicated to all brave men and women who serves our nation in many ways...to keep thepeace of our nation...

i was making models from the age around 5,with wooden pieces and card boards, and it came much serious as i started my research in aeronautics.untill i was making models of , cars, busses, trains,etc..etc...but after starting my research, i came to know that its too things are waiting for me,to do...as a result, i designed many aircrafts my own, fighters...bombers...recreation...but none of them was taken...then i made one microlite, withan engine, from Yamaha, RD350,a powered....but i got a warning, from officials, that they will suite a file against me...so i lost many of my hardly earned money....and many for buying books...and many for travelling around my country...i starved for many days with water...waited in front of many gates...but the final result was the negligence....and after some interviews in tv channels, i got an oppertunity to teach, NCC cadets, at Kozhikode,and i consider as a honour from my nation to me...and from i done many models and it was a realization....for a little extent....

i told, you my ambition was to serve my nation...and not to make money...so i wasnt thinking about making money...it was too easy to me, as i am too gifted in electronics...but i worked only for living and for realizing my ideas....so, my wife married me, while knowing all things about me, and she gave me a good word to me that she will be with me untill my last time...but i denied her...as i know my ideas are differ...but still she was on me...then after making a siege in my family we married...from that moment, i was already thrown from my family...so we started a new life...as she is  a govt employee it was not a head ache to build a life...but after few years, she started to change hers mind...she started to ask me ample of money...to lead a life like my siblings...but i was wandering behind my ideas to serve my nation...so, it was a foolishness from my side...then after my accident, she left me..alone...and said me that, you are a good for nothing...no money...and now you are a burdance...and one morning, she left me, with her belongings in a truck...so it was a shock, as i was too unable to situp even in the bed....and all of my efforts were in vain, as i worked hard, alone to build this small, but good house from foundation...so it was a great lonlyness
within four walls...

Friends...i wasnt kidding you all, actually my intention was to share my ideas here, but i know it was in vain, through this effort...
and i know none of you are fools, and yes again i know, all you know who i am, because i know, each and every work by me, will leave a signature...of mine...still i was posting all of my ideas not to make anything, but to share with you....none of it was for any benefit...to me...so here i am apologize to you all veterans....for the bad issue...and i know our forum is a great forum,with ample of veterans, in all fields, and yes i know i am a silly one among you..and once again..i apologize, and bowing in front of you all....

Anwar...thanks for the great effort from your side, as an administrator, of this forum, and i apologize ance again, that some of my effort made pain to you all...it was nothing  but actually i was sharing my ideas here...and this profile is a fake, but person Rathikrishna is not a fake, a real woman, but i do not have any authorisation on her...still i understand that our forum is too fertile with ample of nice peoples...so i am sorry for the trouble...it may be because of my desperation...with my ideas...and thanks for the guidances and advices you gave me...some times this may be my last words to you because my life is enough for me...its too hard to walk..and unbearable pain...i lost three of my discs..i know i am a good for nothing....because i do not have ample of money....and now no more tears to drop for life...its over....and thanks for the efforts from your side to promote our forum....
and all of my Friends...Veterans....i apologize once again....and please dont bother about me...and dont enquire about me...because,my time is up...have a nice day and nice yummy models....for you....god may bless you all....good bye....

                           Roopesh Keeriyaatt....

and here some of my works..still not compleated...hi...hi...but its all over....thank you all...and apologize..once again...and please stopthis discussion..because dont overload the srver with useless things..and dont waste your time...its a kind request...

good bye....

What a pretty boy -  ;D ( just kidding )

Please don't misunderstand me, but I think you should get some counseling. Think about it and give it a try.

Saikat Sir  :giggle:

Dude Roopesh take it easy man..Please visit again & again..

Just keep posting build pics and share knowledge homey..

Saikat is wicked! >:D

who's he now?
i thought rathi was a female ;) ??? ;D :giggle: :banghead: :salute:

 :o :giggle:

Anwar Sir,

I dont know how I make improper sentenses, Actually, I started to read all at night and all reading all posting takes to me a lot of time to reply and I have not read those all which VC Sir or Augusteniv read in the other forum about personal detail as I cannot found any doubt earlier. However, replying at the time, with excitement and drowsiness as well may be the culprit.

However, As I have not save the PM to AnwarSir, I cannot now remember exactly but asking to contact me for my duty if I have been trusted any duty . But there was no reply only, that means either I need not to do, or you can say I am so childish, that I can be simply ignored or I may be ignored as two major experienced persons are looking after.

However, I don't mind anything as I know what the tough job Anwar Sir is doing to maintain this open minded forum. I have tried to help only as Augustine have rang and warned me that it is an Imposter.

Actually this all happened as I have no reply from XXX and found another named XXX/YYY is also master. That is why i invited and feeling guilty as I have started to making mess.

But Surely, in any forum, I Strongly oppose to post such personal detail rather than the model. Please don't call me to reply me in this thread. If any ambiguity or question again arise, direct dial me on my personal cellphone [+91](09231657193) and just tell that from RCIndia. (or you can SMS me through www.way2sms.com after registering as it shows the incoming SMS from your number, and I will call you)

I will Answer,

One request to Anwar Sir, Please close this thread and 10 channel thread and help us to forgot everything.

Long Live RCIndia, it's Administrator, Moderator, guide, student, teachers, buyers, sellers and all with real identity.

Kalyan -  That was also my point to some extent. I was trying to imagine the end of this...  as it was clear that Rathi/Roopesh had some explaining to do !  But do we point out only enough to force the person to come clean, or dump every bit of awkwardness ? 

The second option would surely cause more grief to an already distressed/troubled soul (that was the only logical explanation for this behavior) and alienate him from this forum forever, which is something I wanted to avoid if possible.  That is the reason I was preaching restraint all along, not in support of something that seems so obviously wrong. 

There is a lesson in this thread... like Augustinev pointed out... one of forgiveness.  That seems to outshine everything else in the long run.  And forgiveness if easier if the initial outburst is controlled/limited.

I do like to point out the only person I remember banning from this forum, Arpit, did express regret in private after couple of days for his outburst.  But I had unbanned his account within a few hours of the banning itself, as it was clear that it was just a matter of time. 

Time seems to be a great healer !!!

Hear! Hear!

Bravo!

 :bow:
I offer this to Mr Roopesh for his knowledge in the field of electronics.
it is my humble request to him to continue posting on this forum.
ps: i need your tutorial in making/modifying toy radios.

i am with speed racer with all my 430 gms of brain  ;)

VC
you know why 430 gms of brain

OMG i am new and see what i found a Treasure trove still in deep seas
Tell Roopesh to stay on and helping poor people like me to get on to something.
He thinks nobody needs him but in fact all need him
One thng i would like to say is roopesh is of the opinion that he wants to leave everything and go since he doesn't have a family
but we all need to remind him that He has one big family now (RCindia) and in a family troubles,fighting,love,sarcasms and compassion all go hand in hand.
One thing i have to say personally  to roopesh is nothing but
[   :salute:  {:)}  :giggle:  :thumbsup:  :bow:   ;D   ;)  get well soon  ]  also it doesn't matter if your are on a bed your body might give up but not your brains wont.   So keep contributing and this will ease your pain.

This should explain it!  ;D

Gorilla and Chimp both would like to be friends with Roopesh and see him back on th forum as soon possible. Full stop!

:giggle:

 :giggle: :giggle: :giggle:     ;D ;D ;D ;D ;D ;D ;D    {:)} {:)} {:)}    :iagree:


VC   :violent:  Augustinev                     :giggle: :giggle:

 :giggle: :giggle: :giggle: :giggle: :giggle:
you guys have gone crazzzzyyyyy
 :giggle: :giggle: :giggle: :giggle: :giggle:

First step to restoring credibility would be his apologising  on all the other forums too.  Cautious optimism would be MY take on the future.

"Cautious optimism" so well put Sir, so well put.

I know Roopesh well before I joined in RCI, to start a friendship I acknowledged in his youtube videos, but he ignored me. After he joined in RCI, I came to know that :
(a) He is a mechanical engg. Graduate.
(b) He is suffering from spinal injury.
(c) His sister is assisting him in making models.

These three points touched my heart because I too have these three points in common. A mech. Engg. , suffered similar spinal injury (VC sir aware of this fact), and my sister was helping me in school days when I was in my model building hobbies.

We all are here because of a similar characteristic that is hobby. Like people see TV, Movies, Photography, going pubs, traveling etc etc, we spend little bit of money and leisure time doing rc activities. It is our hobby not profession. Too much involvement in this hobby will ruin our financial status, family life and even social life. First we have to look after our family, staffs, business or profession etc. then this hobby. Purchasing hobby materials as well as rc stuffs is too expensive and sky is the limit. Even it can ruin a person like Ambani. Last month my younger son (8 years old) asked me “Dad why don’t you sell all your ships and purchase two bicycles; one for me and one for elder brother” and he is right. I should concentrate more on them, their education etc. etc.

In this case I would like to advice Roopesh to be bold & strong in character, as money is lost- nothing is lost, health is lost-something is lost, and character is lost everything is lost. Don’t seek sympathy from others and never publish unnecessary family affairs in an open forum. Be bold, concentrate more on earning from business, and get some good contracts from NCC or from similar organisation.

I and even everyone from RCI would love to see him back.
 :thumbsup:

Who has not been frustrated with one's situation, at point in life or another ? And I see opportunities for a builder like Roopesh opening up just through this forum itself (like the gentleman from the US who was looking for scale modellers).... a lot more can happen if there is a bit more careful marketing (if money is an objective for whatever reasons).

Yes, RC India would like to see the TRUE Roopesh back here.

Why do I get the feeling that we are all going a little overboard in flying this "Welcome back, all is forgiven" flag?

The other forum, where he was crowned a superhero and voted 'Model Boater of the year' and feted by 5000+ members has quietly suspended his account. His status is now shown as 'inactive'. I'm not saying that we should follow them, but enough has been done by us, counselling, personal calls, good natured advice, in short - EVERYTHING except us apologising to him.

I feel we all have better things in life to do and we should just carry on with it and let this thread die a natural death.

This is my personal opinion and the others may or may not agree with it.

VC

I am totally with you on this. We tend to go overboard - particularly with platitudes. Note the - again in my opinion - excessive use of the "bowing down" emoticon in posts. Should be reserved for something really admirable and deserving of special praise but has lost its significance through overuse.

I also know this will cause a lot of heartburn to many. But what I am trying to get at is that our approach should be more balanced and mature. This case, in particular, cries out for that.

Then again, "we are like that only"!

If somebody has his number please give him a call and say to him that

"Come back on this forum or Else"

with VC and Sushil on this, we have done what we have to, it is entirely upto him now. To be or not to be.

Another school of thought is what VC brought out, BHMB or whatever (Pun intended) that boat forum is, recognized his work with the same fervor as his Juvenile delinquency (I still want to believe it was Juvenile, for simple reason that rep #22 #23 our antennae went up, so his disguise obviously was done in a very non professional manner) in making his account in active

VC
I have been viewed more than you! (#127), 138 vs 117 (Last score)

WingCo, stop fooling yourself. In this forum the majority of members are men and they have viewed your picture more than mine only because my manly good looks are too much for them to handle. So there!  :giggle:

I am posting my picture on my profile so that others can appreciate my good looks, better!

ok i get it, now that your visibility has been thrust upon us, we have no choice , eh

Forgiving or not forgiving is a personal choice / opinion ;) 

Some find it easy, some find it tough, some find it foolish... enough said !