RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: December 16, 2022, 02:57:05 PM »
keshv14
Plane Lover
Active Member
**

Reputation Power: 1 
keshv14 has no influence.
Offline Offline

City: pune
State: Maharashtra
RC Skills: Beginner
Posts: 6
Join Date: Nov, 2022




We can build arduino based CNC pen plotter. It is used to draw anything and everything you want! It is based on the design program that was input into their controller unit. We use Arduino UNO, a CNC shield, an a4998 driver, Stepper motors, and a Servo motor. We use https://robu.in/3D printing service to print 3D parts. You can check this project at https://robu.in/cnc-plotter/. Here you will find all the information you need to start your projects.

Logged
 

Read
« Reply #1 on: December 30, 2022, 07:50:43 PM »
clevermax
Car Lover
Active Member

**

Reputation Power: 1 
clevermax has no influence.
Offline Offline

City: Trivandrum
State: Kerala
RC Skills: Intermediate
Posts: 4
Join Date: Dec, 2022



We can build arduino based CNC pen plotter. It is used to draw anything and everything you want!

Thank you for this link! I was starting with an R&D on a very similar need - not plotting but tapping and swiping on a touchscreen. I guess this solution will work, of course with some mods.

Any idea about the approximate cost to build this project?
Logged
 

Read
« Reply #2 on: January 01, 2023, 04:47:11 PM »
clevermax
Car Lover
Active Member

**

Reputation Power: 1 
clevermax has no influence.
Offline Offline

City: Trivandrum
State: Kerala
RC Skills: Intermediate
Posts: 4
Join Date: Dec, 2022



From where can I get the STL files for the 3D-printed models? The robu page doesn't have them. Could you please share them, or post the link where they are available? Thanks!
Logged
 

Pages: [1]   Go Up
Jump to: