Hi,
I have build a Lipo Charger based on MAX1758 IC. The results are quite impressive.
8 Pin Dip switch is used to select No. of Cell's, maximum charging current is 1.5A and other decent features.
However, i would like to add a balancer to the circuit so the cells are balanced while being charged.
A good balancer schematic is one like
this, but only problem is how to make the charger/balancer automatically select the no. of cells to be balanced?
I was looking around for the schematics of Turnigy E3 Charger as it is quite similar to this charger.
If anyone could help with this.
I already have a Turnigy Accucel 6, so this is just for experimentation purpose.