What can you expect from Auto Pilot System ?
--> Cheap + Stable + Easy to fly + Easy to setup + Easy to tune + Expandability

Well get ready to expect more
--> One board + One antenna with 6 senors powered by 32 bit processor

I hope you like the below tech specs

-> 3 axis Gyro
-> 3 axis Accelorometer
-> 3 axis Magnetometer
-> Absolute pressure sensors
-> 10 Hz Helical GPS
-> Super sensitive sonar
-> Full telemetry support [ Copter <--> copter & Copter <--> GCS ]
-> Multiple software support

Some tested features of the BRIANWING INS system:

--> Get a Indoor 3D position lock within 5secs :: No more slow GPS wake up or waiting
--> On board power supply bus  :: Now directly supply power from lipo for ur LEDs
--> Upto 8 motors support and 8 input channels :: Super feasibility to build almost anything
--> Separate dedicated camera control hardware :: Super stable FPV
--> Full support for Hand throw launch :: Now dont take off from ground just, throw off !!
--> Futaba S-Bus support :: One wire from radio to controller for all the channels

Flight features

--> Auto take off and auto landing
--> Multiple way point support with amazing accuracy
--> Care free,Position hold, Return to Home, Reverse track home
--> Follow me, copter to copter follow or copter to ground object
--> CAN bus voltage monitor, RTH on battery low
--> Full acrobatics , flips and barrel rolls
--> Point of interest for Camera focus
 
And finally proudly "MADE IN INDIA"

A request to the Admin: Please keep the first post of the thread open so that I can edit it. Because in next few days there are lot of stuff to be added there. please

Regards
Hemanth

I will be uploading the pics of the controller in next 72hrs...

  Wow. ..  Waiting for pics

great man.waiting for more info!!

Interesting project. Subscribed!

My exams starts from 8th of Dec this month so there will be low speed development for next 25 days then comes the real thing. The final product is being shipped banglore will there here by 2morow

oh great keep it up 

I need testers for Fixed wing  { Both Nitro & Electric } or Traditional Heli { Both Nitro & Electric }

Please PM me is some interest the test hardware will cost 11K.

All the important developments of the project will be updated on the first post of the tread 

The official frame CMT Edition:-



--> Full Z Weave carbon fiber
--> Metal joints , virtually indestructible
--> 240 grams only, with all metal hings and bolts

Camera mount for Real Time Stream Camera:-



 
The official CAMERA MOUNT for the controller:-


 
FIBER GLASS body



High torque [ 6Kg ] LOW PROFILE digital servo

This camera works the best of POV functions,  can be use with big cameras like Cannon EOS 550D

Features:
--> Tilts to 180 degrees
--> Super smooth servo operations
--> Attaches to the main frame with spring suspension to eliminate vibrations

Price: 2800 inclusive of the Digital Servo

Pic updated...

Brainwing INS first videos

RTL demo


Position Hold


More videos soon,,,,

Sorry for late video updates

Quad specs
11.1v 40c 2650 Mah Battery
750 Kv motors
30 AMP ESC
Max fly time 36 mins + with a 400 gram camera

setup is very good video is poor , we really want to see a good video

Hemanth good flying

This the test with Advanced Auto Gain loops enabled so no more PID tunning [ Its still in beta stage have look !! ]



AAG also remove the wobbling during descending 

http://www.youtube.com/watch?v=GPbU4AmcK-k&feature=youtu.be

hey really wonderful hemanth bro.keep it up guys.

wow man ,  and what radio you have looks like 9x ..

guys you need to shoot with some HD cam.really nice work specially that RTL demo, just want to ask you was that crash touchdown?

No way you can fly for 36min with a 2650mah lipo, and doing it with a 400gm payload, you must be joking.

And is that a DJI Flamewheel frame?

thanks for saying my doubt

Even a plane of this weight could barely manage that time with lots of glide time

New videos....
Night flying

Who is challenging the Fly time ? meet for a million dollar bet

I will show the reality 

if you have something than please prove ..how 4 motors and million electronics can work for over half an hour..

Its call T motor; 6 amps average current draw for regular flight at 60% throttle; Try them or meet me I will show them to you in reality. 

Wow! It looks really cool at night!

Thanks..

6 amps per motor or by the entire drive of 4 motors??

Per motor ayush; not all ....entire drive is about just above 20 amp

thankyou for clearing the doubt 
really ,could you please share a link for that motor it would be great ,

+1
I'd like to get those motors for my quad too.

Hey nice work hemanth bro. I found that just bit more throttle above hover position gives allmost double flight time so 36 minutes is possible. There is record on rcg '51 min in air' without payload you can achieve that and as you said overall current draw is 20Amp then you can push the limits. Keep it up.

Here is the link of the motor:

http://www.rctigermotor.com/show.php?contentid=145

But please get ready to punch your pockets for those

Please read the specs of the motors; Then all the doubts about the fly time will be clarified.....

Woah! Amazing specs! Just went through the tech data.
Price is a pocket burner, though...

 

My new AD8 Heavy Lift clone ; 60% the cost but 96% carbon fiber






Motor mount




Belly of the beast


Center plate 5mm 3quill carbon fiber



Call me for pricing....

First of all congrats on your achievement ... your achievement is so great that its hard to believe.

 

I did some calculations and seems something is wrong …

Time = Battery capacity / Current drawn

Battery capacity (Ah) = Current drawn (I) x Time (H)
so, 2.7 = 2.7 * 1

It is said that given system needs 20 amps

Time = Battery capacity / Current drawn

Time = 2.7 / 20

Time = 0.135 (H)  = 8 minutes

this is considering that it will take 11.1 V all the time

Now If we consider it only take 5.5 V then also flight time will be about 16 minutes

Can Hemanth/anyone please explain where my calculation are wrong?

+1

Sir for which MR did u do the calculation Quad or my new octa

Saw the motor link thanks for that..

Btw what are the lights that you have used. And where did you buy that frame from??

Exactly my view, he says 6 amp avg current draw ie 24amps for 4 motors. Not 20 amp like you calculated.
I have various quads and various motors including the said T motor, mine with a 1045 prop draws 9 amps at 75% throttle.

The lights are from HK and the frame custom made out carbon fiber

I will post the calculation please give some time,,,,,

Check the reply by Hemanth Reply #27 and that is why i consider 20 ...

We all are eagerly waiting to know the math behind this..

and if it works as you are saying then ... we can upgrade easystar with this motor and fly it for 2+ hours

Hemath, Please dont call me sir... I am not senior in this hobby.

I did it for your Quad  as you said in reply # 27 that it draw 20 amps and the link which you gave says motor will take avg 6 amps and battery capacity is given as 2650 (rounded to 2.7A)

Oct finally files



I tested it with WK-M

I will test with my INS system soon;

The gains need to be tuned its just first flight

sir what is the brand of your six sensor quadrotor contol board and what is the cost
please post the link for control board

@hemanthguru:
I wonder how I missed this thread.

1) You say the FC is 32-bit. Which CPU is used? STM32?
2) Is the code self-written?
3) Any GUI for configuring various parameters or do you just use those on-board pots?
4) Can you specify the IMU used or the names of the individual sensors?
5) Did you port any open-source multirotor platform like Multiwii onto your code, or is it completely different?
6) Do you plan to retail it? If yes, at what price?
7) Is your product open-source? Can anyone modify the code to their interest/requirement?

And I must say "GREAT JOB!" I am EXTREMELY proud to see this from INDIA.

Vineet

1: No ARM 7 with a Cyclone for security
2: The code is accumulated work many FC codes
3: It uses MAV so u can use APM planner or Q ground or My IOS App to configuring
4: It uses a gasoline grade 9 DOF IMU which internally dampened
5: Its uses the best algorithm for the function from all the FC programs,
6: The FC will not available has a controller, It will come with a fully build copter itself [ Copter with 1, 3 , 6, 8 Kg payload with gyro stabilization ]
7: No, The code is not open source, but can altered to requirements of any kind. The variations can be done.

Hmm.. Okay.

I finalize the control loops and navigation algorithms I will put up the test videos in next 5 days

subscribed

waiting for the video!!!!!!!!!

This video was shot in low light and the Gimbal Home made.

The copter is running Brainwing INS + Gimbal stabilization

http://www.youtube.com/watch?v=3KauuWKM3HM&feature=youtu.be

The camera which was to filim the copter had no battery in it. I will upload few more on monday

If you have time please see from first or else skip 1m 40s

nice video!!!!!!

That's absolutely smooth, and no jello effect. It's hard to believe the gimbal is scratch-built.
And there's no fish-eye effect, isn't it a GoPro?

Its NEX 5 , And this no jelly effect because there a vibration dampening balls I have around 16 of  them. Its not a go pro Its Sony NEX 5 Mirror less SLR

And the gimbal is Gyro Stabilized

Nice.....

AUTO GAIN CONTROL FINALIZED

Please see the quad adjusting the user inputs and changing PID automatically to match the flying style



If anyone wanted aggressive flights see this !!!