Title: SPIDER ROBOT, DIY, 3D printed parts Post by: Dharmik on August 29, 2018, 11:37:52 PM Spider Robot - Quadrupad
Parts used: 1. 12 x SG90 servos 2. Arduino pro mini 3. DC-DC module 4. 3D printed parts 5. Own designed circuit 6. 2S lipo https://youtu.be/1Vf6dp8zLrw Title: Re: DIY 3D printed Spider robot Post by: Dharmik on August 30, 2018, 11:15:27 AM Got the 3d printing done from Ritik Harbola. Special thanks to him
Title: Re: DIY 3D printed Spider robot Post by: K K Iyer on August 30, 2018, 07:50:52 PM @dharmik,
Looks like a great project well executed {:)} But no response so far? I’m taking the liberty of amending your topic heading to make it more catchy. Hope you don’t mind. Regards Title: Re: SPIDER ROBOT, DIY, 3D printed parts Post by: Dharmik on August 30, 2018, 09:36:57 PM thank you sir for your appreciation.
Title: Re: SPIDER ROBOT, DIY, 3D printed parts Post by: Mehul Anand on August 31, 2018, 06:55:28 AM Well never seen something like that and how do you make just one arm move??
Hope you will do a build video... Title: Re: SPIDER ROBOT, DIY, 3D printed parts Post by: Dharmik on August 31, 2018, 09:04:51 AM Hello Mehul, please check the description below the YouTube video, there is complete build of original robot maker. i just changed the circuit design and few other mods, will try to get them video later.
Title: Re: SPIDER ROBOT, DIY, 3D printed parts Post by: Mehul Anand on August 31, 2018, 09:25:44 AM Oh, I will surely check that video...
Title: Re: SPIDER ROBOT, DIY, 3D printed parts Post by: taksh on August 31, 2018, 09:47:01 AM @Dharmik
your own code? or other's code? Title: Re: SPIDER ROBOT, DIY, 3D printed parts Post by: Dharmik on August 31, 2018, 10:19:57 AM There are some example codes avaialble by regishsu who posted this on his blog. i am planning to get my own or from python GUI regishsu made.
|