|
Title: E-Starter Replica Post by: sandeepm on July 09, 2009, 01:05:18 PM Hi,
My first Replica fuse of E-Starter made from Depron. This was made three months ago. The wing is original of E-starter, rest, Fuse, tail wing and Rudder is of depron. the plane fly very well. but due to non reinforcement of fuse it broke into two. Notice that Rudder and elevator servos are mounted on tail wing itself. (http://img26.picoodle.com/img/img26/2/7/9/sandeepm/f_DSCF0127m_9d0af13.jpg) (http://www.picoodle.com/) Title: Re: E-Starter Replica Post by: rcforall on July 09, 2009, 01:21:00 PM That is the true Aero Modeling Spirit don't give up on anything Well done Sandeep
Sai Title: Re: E-Starter Replica Post by: anwar on July 09, 2009, 01:37:59 PM What I like best is the nose-wheel ;D {:)}
Title: Re: E-Starter Replica Post by: sandeepm on July 09, 2009, 02:15:16 PM Yes, Nose wheel is also made up of two sandwiched Depron sheet, sanded to wheel shape, axle is made up of bicycle spoke and two set of nuts.
Title: Re: E-Starter Replica Post by: Pikle6 on July 09, 2009, 03:04:34 PM i am looking forward to fibreglassing the model as it will be tougher and i know how its done. but it will take a lot of time will do it after a few months
|