|
Title: F22 Raptor with Thrust Vectoring!!! Post by: Pikle6 on May 19, 2009, 04:51:50 AM hey guys i just woke up (it's 4:40 in the morning) and i am prepping up my raptor for its maiden run and yes it has a fully working thrust vectoring system and also i have a gyro on board for extra stabilisation i wont be using it . i will post details and plans after i come back (10:30 am or somethin) YAWn!!.well to end it all i am posting some pics. ENJOY!!!!!!
(http://sites.google.com/site/f22raptorrc/Home/120520091246.jpg) (http://sites.google.com/site/f22raptorrc/Home/120520091253.jpg) (http://sites.google.com/site/f22raptorrc/Home/120520091249.jpg) for some reason it is not showing the pics anyway the url http://sites.google.com/site/f22raptorrc/ (http://sites.google.com/site/f22raptorrc/) Title: Re: F22 Raptor with Thrust Vectoring!!! Post by: Pikle6 on May 20, 2009, 05:35:04 PM hey guys finally success the f22 flies. First two flights were too good. then my servo mount became loose :o it was the elevator servo. the elevator was quite heavy with the motor mounted on it. we decided to give it one more try and you can guess what happened next CRASH!!!!!! >:( >:( >:( >:( . the servo did not respond to inputs and the crash resulted into break of a control horn. then were two more crashes. one was nose dive the model was rigged with carbon rods to transfer the energy all over the body hence till now no equipment damaged just a small little piece of foam came out of the model. we decided to call it a day. next thing i am planning with it is make a bigger model and i am making a ducting system of my own and removing the motor from the elevator. also new design has is elevons or ail-a-vator that's because i was not happy with the throw of the ailerons. so stay tuned for the next test. also can you people suggest some control rods as cycle spokes are too heavy and is a trouble to cut them. the custom made ducting for my 2212/06 with a 6*4 prop is my latest addition is my favorite part. will start work tomorrow. thanks. pictures of the next design
(http://i635.photobucket.com/albums/uu71/Pikle6/assemblywithwiringandsomedetails.jpg) the duct (http://i635.photobucket.com/albums/uu71/Pikle6/ducting.jpg) Title: Re: F22 Raptor with Thrust Vectoring!!! Post by: izmile on May 21, 2009, 01:56:27 AM Just brilliant!!.. Would like to see your progress on this.
Title: Re: F22 Raptor with Thrust Vectoring!!! Post by: rcforall on May 21, 2009, 09:24:55 AM I think the 18 amp ESC as mentioned in your diagram would not be suitable for the 2212/06 motor which has max amp of 22 amps.
sai Title: Re: F22 Raptor with Thrust Vectoring!!! Post by: Pikle6 on May 21, 2009, 10:29:40 AM thanks sai uncle i think i will use 25 amp esc available with one of my friends
Title: Re: F22 Raptor with Thrust Vectoring!!! Post by: krusader on October 06, 2011, 01:51:55 PM wat material did u use to build it(frame) and from wer did u buy it??
|