|
Title: MultiWii Schematic OK to use? Post by: ghoshatanu56 on August 01, 2015, 11:27:19 PM I know that many of us here have experience with pcb designing.So if can please tell me if there is anything wrong with the schematic and board of multiwii i made with sensors mpu 6050,bmp 180, hmc 5883l and an atmega 328p-pu dip 28.Given below is the url.
https://github.com/ghoshatanu56/MULTIWII-SCHEMATIC.git (https://github.com/ghoshatanu56/MULTIWII-SCHEMATIC.git) If anything is wrong or can be modified for better performance please tell me in this post. Regards Atanu ghosh Title: Re: MultiWii Schematic OK to use? Post by: ghoshatanu56 on August 02, 2015, 08:21:03 PM Well i forgot to mention that this design doesn't uses any module, rather it has the foot prints of sensors. Directly,. So if anyone is seeing this i will be happy to have a suggestion from them.HERE IS THE IMAGE OF THE SCHEMATIC
(http://) Title: Re: MultiWii Schematic OK to use? Post by: saikat on August 02, 2015, 09:06:49 PM no extra i2c pullups ?
use a few more leds .. one for each sensor power , and two for the m328 serial lines Title: Re: MultiWii Schematic OK to use? Post by: ghoshatanu56 on August 03, 2015, 01:33:31 AM ok added i2c pull up resistors added and atmega 328pu tx rx led addded .anything else @saikat
https://github.com/ghoshatanu56/MULTIWII-SCHEMATIC.git (https://github.com/ghoshatanu56/MULTIWII-SCHEMATIC.git) |