RC India

Hi,

I have started with a new model, 30" wingspan.(almost done).
Below is the link for the free plan:

http://ultralajt.webs.com/freeplans.htm

Few pics attached.

Thanks

Looking good already R.C. All the best! :thumbsup:

Here are few pics of canopy, made from 2ltr pepsi bottle.

Hey, thanks VC.

"Here are few pics of canopy, made from 2ltr pepsi bottle."

 {:)} :salute: :bow: {:)} :salute: :bow: {:)} :salute: :bow:

Few more pics of canopy

Hi,

here are few pics of landing gear, made from 3mm rod. it took long time to bend it and get the same shape for both the gears.
These are removalbe landing gears.

Thanks

:thumbsup:  What do you have in mind for wheels ?

Few more pics.

Hi Anwar.

I am planning to buy wheels from RCDHAMAKA.
Actually Anwar, the model i have done is for a engine powered, as someone in bangalore was selling a used 1.5cc nitro engine, so i planned to purchase it & made this model, but the engine is not in good condition(very old). So i did not purchase.

But now i have decided to used my brushless motor, but i feel the model will become heavier, i have a "EMAX CF 2822" motor, 30 amps ESC, and 11 v battery(2200 mah), but the problem is the battery is heavy(150 grams). wondering if it will fly with the small wingspan. i will weigh the model tomorrow and keep you all updated.
Please assist.

If anyone has a 1 cc or 1.5 cc used engine, who want to sell, please PM me.

Thanks.

Wing construction pics.

Few more pics

More pics.

I have drilled 3mm hole in the centre of the leading & trailing edge for the screw(AS SHOWN IN THE PICTURE).

Sorry the pics are not clear, but the area in pic which is circled in red are where i have made a hole.

Thanks

RC great build... pls let us know when you finish it?... and what parts are you waiting for to complete this project?...

Thanks Sujju,

I am waiting for monokote wing covering, i will order it today from rotor(chennai).
But Sujju as mentioned in earlier post, i think the weight will increase as i have 11v battery which weighs 150grm. anyways i will weigh the model tomorrow & keep u all update.

Thanks again VC.

Fusealge.

C G   CHECK,

Just installed the servo, receiver, battery, esc & did cg check, it is tail heavy & i feal the model weight is around 700 grams( i am guessing ). will check the weight today.

Hi RC,

Very good design.  {:)}

You mentioned the weight: 700gms. What about if the structure build with coro plast will decrease?

Suppose, to convert the same to electric, which electric motor you choose?

Regards,
Dileep

The airfoil looks very professionally finished, so is the whole plane. Please post the maiden video and all the best  :thumbsup:

Thanks Vinay.

May be next week will do the maiden.

Will post the video here.

Thanks Dileep,  I am not sure if the weight will increase if u make it in coro.