Guys I have got a quad platform made by Rcforall from a friend of mine. he didnt give me his radio so I connected my radio to it , but I am not able to arm it neither am I getting any manual for it online.

Please do help me its urgent.

Not sure from this link which controller board they are using :

http://rcforall.co.in/product_info.php?cPath=34_82&products_id=296

Hopefully Sai will respond soon, or you can PM "rcforall" here.

Thanks Anwarji.... was able to arm it and fly it today... but after a hell a lot of work also i was not able to tune the platform properly. I even removed all the connections and reconnected them according to the instructions on KKmulti copters site. Still there were a hell a lot of variable.
1) the roll pitch and yaw Pots are not labeled.
2) neither are the roll pitch and yaw gyros labled.
3) don't know what code is loaded on the platform ( quad copter 'X' configuration or '+')
4) no proper details on how to tune the platform.
5) no manual for the ESC and the platform. ( I wanted to connect a 3 cell battery to it but wasnt because I didnt have the proper details to program the ESC)
I even tried asking the guy who purchased it, but all he told me was he never got the full details of the platform.
Even after being an electronics person I was not able to get it flying stably. It took me more than a day to trace the whole circuit and label all the parts including the gyro and the pots.

Even after facing all such problems I am happy that I flew my first multicopter.

Sai sir, if you see dis, do look into all these problems, would be really happy to help you out with improving the electronics.

Thanks for the feed back this is what helps us to improve the product and the services .
We have just about started selling these quads .

These Quads have been developed by us along with Nandakumar the  ornithopter man of India .
These Quads are optimized for use by beginners using our 4 channel  radio.

1) the roll pitch and yaw Pots are not labeled.  : There is a single pot  the other two axes are optimized internally , our effort here is to ensure minimal adjustment for a beginner .
2) neither are the roll pitch and yaw gyros labled : if you look carefully you will see them marked on the PCB
3) don't know what code is loaded on the platform ( quad copter 'X' configuration or '+') : the configuration is Square " X "  hence a single POT will do
4) no proper details on how to tune the platform. we have a photo instruction manual  but unable to upload it on the site as the file is too heavy will mail it to Anwar to find a way of uploading.

Any way to make it easier we will also label the servo extensions henceforth to make it easier to connect.

Any issues you can always PM me or call me my mobile number is  available here on RC India at Multiple locations adding it once again 09380577074

Sai

Coolprateesh,
If you let me know your email I'd I can email the instruction manual

Sai sir can i get only quad control board,what is the price

Rajesh ,
We donot sell the board separately  , but can consider special case for you .
Please send e mail.

Coolpratesh ,
Mail sent

Sai

First thanks to sai sir
my mail id rajsigma@yahoo.com

@Rajsigma here are the photos you requested.