Hello guys,
I am planning to build a short range FPV plane , inspired by Sky walker/sky surfer/bixler and MQ-9 Reaper. Jokes aside,
I have started to build the project in September 29th and expect completion before October 12th. It is for a science/technology Exhibition conducted by the Kerala State Government for State level schools on October 17th.
So,
Here are the specs of the plane:
 36' wingspan
26.7' fuselage length
Max weight 900 GM's
Body made out entirely out of medium density packing foam from refrigerator packing foam, wing made from high density foam sheets. Body is reinforced with fibreglass and barbeque sticks. Wing reinforced with metal rod. Normal tail configuration. Tri-landing gear.
Plane Electronics Specs--
Motor:2212-6 2200kv motor
Prop:6x4E
ESC:40A
Battery:3S 2200 Mah 11.1v Lipo
Servo:4x9g servos
Tx/Rx:Flysky TH9X 2.4Ghz with 9ch receiver
FPV Specs--
TX/RX:5.8Ghz 600mHz transmitter and receiver
Camera:Sony DHS chipset(from Sony Effio-e camera)
TX Battery:3S 500 Mah 11.1v Lipo
RX Battery:3S 1300 Mah 11.1v Lipo
Recieving system: 4.3 inch monitor

Will be posting new updates and would like to hear your feedbacks.
Regards
P.S:\/ \/ \/ Started bodybuilding 😁

Wing and horizontal stabilizers made using hotwiring and sanding. 36'x6' single wing (not two parts stuck together)

hi
how did the build come along??? did the airplane fly? why dont you post some pics if you have any. would be nice to take a look at the finished aircraft