Title: Turbo boost your old transmitter Post by: fxshoppe on March 11, 2017, 02:41:40 PM I have been successful in create a bare minimum controller using atmega DIP board and .96 OLED to run opentx or ER9x.
This upgrade will cost you only arround 1200 and a loan of USAP to configure for first time. you can use your existing CT6B case and receiver but with 9 channels and the features of expensive turnigy 9xr. If you are using telemetry capable module then it can be configured also out of the box with addition of a hardware not over Rs. 100 http://www.rcindia.org/for-sale/atmega128-dip-bare-board/ board http://www.rcindia.org/for-sale/96-inch-spi-oled-display/ display |