hi guys?
just a question-can we make a ultra thin rc vehicle[<1cm thick][weight no bar][speed no bar]
just was thinking about it

anyone interested in helping me out??

did you mean thick as "Length or width"?

the 3rd dimension
neither  length nor width but height
i mean that a ultra slim vehicle

so can it be made???

I think you want to say that the vehicle must be like a thermacol sheet.

if yes then it can be made (like a car)

yes u r absolutely right
i want it to be as thin as thermo col sheet!!!

i'll try and post some pics but only after march (board exams)..........

ok well i will also be having exams from 8-22 so i will also not be here for that time!!!
when are boards ending?
in which board are u studying?

i m in 12 std CBSE board my last exam will be on 25 march .tommorow i'll be having my first exam .........

also even then i'll be having my enterance exams......but i can manage........
and best of luck for ur exams


cheers!!!

kartik

best of luck to u also
i m in icse board but will be having my board exams next year as this year i m in class 9th

hi all
i have been working on it and have prepared a basic design on what am i going to do
i plan to keep it as light as possible
here is the diagram which illustrates my idea
if there is anything wrong with it please tell
i plan to use 4mm vibra motors for the front steering / turning motors
and 7mm motors for forward motion[thrust]
the batteries will be 138mah lipos [10c 1cell]
will put them is 2p config[putting two of them in parallel]
link to 7mm motors which i'll be using click here
will be using these wheels
for the base i'll be using a board which is similar to coro but is not plastic but carboard or something-is hard and light and 1-2mm thick
will cut it as per requirements got it as a packing of dell studio 15 laptop charger
receiver will be of a rc toy car[proportional one if able to get else normal]
i weight 6gms i think and range is abt 100-150 ft with what i get
please tell if it will work
-Ankur

the design
plz help me out with it

an edit:the motors which will use to give the vehicle forward motion will be in parallel and not in series config