|
Title: Need help choosing servo & Review of the mg996R servo Post by: Tarun Joseph on May 08, 2021, 10:49:31 AM Hey guys,
I have a Kyosho Inferno, one of the stock kyosho prefex servo died...so i replaced it with a mg996r which claimed to be metal geared...i used it for a run or two and the gear stripped(I was very sure metal geared servos dont strip so easily).I opened up the servo and found out it was completely plastic except for the output axis(the outer part of the servo..where the servo horn connects to) VERY DISAPPOINTED!! Now planning to replace both the servos...any worthy budget servos available in the indian market? Thank you :hatsoff: Title: Re: Need help choosing servo & Review of the mg996R servo Post by: o.kashelkar on May 08, 2021, 12:16:05 PM never use mg996. use better servo more than 15 kg atlesast for good response on steering. throttle anything is fine
Title: Re: Need help choosing servo & Review of the mg996R servo Post by: Tarun Joseph on May 08, 2021, 12:26:25 PM Used the m6996r on throttle and the stock prefex on the steering :(
Still had an issue Any recommendations for servos in that same price range or slightly above it :hatsoff: |