RC India

RC Equipments => Servos, Gyros and All Electronics => Topic started by: santanucus on October 03, 2015, 01:28:41 PM



Title: Error in video
Post by: santanucus on October 03, 2015, 01:28:41 PM
Please take a look at the attached snapshot of the video which I recorded with the Boscam TR1 all-in-one camera. Initially the video was ok but after about half an hour of recording (on an off...not continuous) I got this.

The three segments of the video frame got interchanged. The segment 1 is supposed to be at the top, 2 at the middle and 3 at the bottom. So apparently 1 and 3 got interchanged. This happened at the middle of a recording. A few minutes into the particular video clip this thing happened. All subsequent clips have the same problem.

But later I recorded video with the camera (although not for a long time) and the video seems to be coming ok.

What could be the issue? I am using a Samsung 32 GB EVO Class 10 MicroSD HC card.

Thanks.