Hello,
Its been a lot of time and now that my exam is over, I finally decided to come back to my multiwii board to see if it works before I get sick of it and throw it in the bin.
I need a bit help from you guys. I brought this --> http://www.ebay.in/itm/M312-FT232RL-3-3V-5V-FTDI-USB-to-TTL-Converter-Adapter-Module-for-Arduino-/111937092109?hash=item1a0ff87a0d:g:gr0AAOSwZ8ZW5~14
Now I downloaded the driver and the programmer comes in the device manager under the ports section with the name "USB Serial Port".
When I upload the multiwii program to the board, this error message comes up -->
Arduino: 1.6.8 (Windows
, Board: "Arduino Mini, ATmega328"
Sketch uses 12,876 bytes (44%) of program storage space. Maximum is 28,672 bytes.
Global variables use 1,046 bytes (51%) of dynamic memory, leaving 1,002 bytes for local variables. Maximum is 2,048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xbb
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xbb
Problem uploading to board. See
http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
I need help in this matter. The board blinks rapidly when I connect the ft232rl to the PC.
I am attaching a pic regarding it. Please see it. Thanks