|
Title: HELP, APM 2.6, No mavlink ??? Post by: radiocraft on November 03, 2014, 03:57:34 PM I have a APM 2.6 suddenly it stopped connecting to computer, any can help me with this.
Computer detects the device, but when connecting via Mission Planner it says no heatbeat recieved? Any1 knows what may be the problem.? Title: Re: HELP, APM 2.6, No mavlink ??? Post by: saikat on November 03, 2014, 04:10:44 PM are you using usb or connecting wireless ?
Title: Re: HELP, APM 2.6, No mavlink ??? Post by: radiocraft on November 03, 2014, 04:18:15 PM usb
Title: Re: HELP, APM 2.6, No mavlink ??? Post by: SideWinder on November 03, 2014, 05:36:49 PM Well you have to eliminate possibilities one by one,
Begin with trying to connect via terminal or try to upload firmware (probably plane or rover then revert back to quad or whatever you were using), changing the usb cable,usb port, Updating MP, Try it on a different PC. Title: Re: HELP, APM 2.6, No mavlink ??? Post by: radiocraft on November 03, 2014, 05:38:10 PM Ok. Will try all this and let you know.. Thank you.!
Title: Re: HELP, APM 2.6, No mavlink ??? Post by: saikat on November 03, 2014, 05:55:48 PM you can try on a different pc.
the problem is you cannot update firmware if you cannot connect mavlink alternative is to download the arduino ide and flash new firmware, Title: Re: HELP, APM 2.6, No mavlink ??? Post by: SideWinder on November 03, 2014, 06:37:57 PM I had faced similar issue where I can update the firmware/ connect via terminal but cant connect to MP (Still have that FC with me). Eventually in terminal I was able to see that my gyro wasnt initializing, so it was an issue with the APM 2.6 sensor.
Title: Re: HELP, APM 2.6, No mavlink ??? Post by: radiocraft on November 04, 2014, 05:49:31 PM OK.
Title: Re: HELP, APM 2.6, No mavlink ??? Post by: radiocraft on November 04, 2014, 05:50:22 PM Nothing working... Tried different PC everything... Getting a new one.
Can any1 tell me hpw to set launch position as home position always on APM Title: Re: HELP, APM 2.6, No mavlink ??? Post by: SideWinder on November 04, 2014, 06:14:42 PM Arducopter sets home position when it arms, thats why it is necessary to let it get a gps hdop of 2> before arming after powerup.
|