RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: June 05, 2012, 09:35:36 PM »
pradeep_K_B
Plane Lover
Active Member

**

Reputation Power: 1 
pradeep_K_B has no influence.
Offline Offline

City: Malappuram,Kerala
State: Kerala
RC Skills: Beginner
Posts: 35
Join Date: May, 2012




hello....i have an ESC withe me..but i dont have a ready made remote control system,,..instead of that im using a home made remote control,made from 433Mhz rf module...now i need a circuit to generate PWM signals for my ESC....just need the mazximum throttle and off condition....pls help me....
Logged
 

Read
« Reply #1 on: June 05, 2012, 10:03:13 PM »
spitfire
Plane Lover
Forum Hero
*****

Reputation Power: 7 
spitfire has no influence.
Offline Offline

City: Bengaluru
State: Karnataka
RC Skills: Advanced
Posts: 506
Join Date: Jul, 2010



You can use microcontroller like atmega 16 to generate PWM signals
Logged
 

Read
« Reply #2 on: June 05, 2012, 10:07:02 PM »
pradeep_K_B
Plane Lover
Active Member

**

Reputation Power: 1 
pradeep_K_B has no influence.
Offline Offline

City: Malappuram,Kerala
State: Kerala
RC Skills: Beginner
Posts: 35
Join Date: May, 2012



can I use PIC??...i dont have a programmer for atmega...Sad
Logged
 

Read
« Reply #3 on: June 05, 2012, 10:12:52 PM »
spitfire
Plane Lover
Forum Hero
*****

Reputation Power: 7 
spitfire has no influence.
Offline Offline

City: Bengaluru
State: Karnataka
RC Skills: Advanced
Posts: 506
Join Date: Jul, 2010



Any microcontroller that provided timer can be used. Refer datasheet of your microcontroller for timer feature.
Logged
 

Read
« Reply #4 on: June 05, 2012, 11:48:51 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



Something along these lines.

http://www.pages.drexel.edu/~kws23/tutorials/PWM/PWM.html
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #5 on: July 31, 2012, 10:06:45 PM »
sanjay ghosh
Heli Lover
Active Member
**

Reputation Power: 1 
sanjay ghosh has no influence.
Offline Offline

City: howrah
State: West Bengal
RC Skills: Intermediate
Posts: 1
Join Date: Jul, 2012



you can ven use a 555 chip for doing the needful-sanjay
Logged
 

Read
« Reply #6 on: July 31, 2012, 11:41:02 PM »
KALYANPRODHAN
Global Moderator
Forum Hero

*****

Reputation Power: 17 
KALYANPRODHAN has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Intermediate
Posts: 1584
Join Date: Jul, 2010

Information sharing improves knowledge of both.



Hi
Just go through the thread and related links. You will get them.
But you need an RF Blocker to receiver module for noise suppression due to motor commutation.
http://www.rcindia.org/radios-and-receivers/simplest-tx-rx-diy-anyone-interested/msg51753/#msg51753
Logged

We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.
 

Read
« Reply #7 on: September 07, 2012, 03:33:39 PM »
bhaumik
Plane Lover
Active Member
**

Reputation Power: 1 
bhaumik has no influence.
Offline Offline

City: Gandhinagar
State: Gujarat
RC Skills: Beginner
Posts: 16
Join Date: Jul, 2012



Hey fellas,

 Whats the difference if we give 50Hz PWM to 30 Amp ESC and 500Hz PWM to the same ESC..??

And what will be the effect on quadrotor if I use 3 ESCs of 30Amps and one of 25 Amps..??
Logged
 

Read
« Reply #8 on: September 07, 2012, 07:41:28 PM »
srivatsa
Heli Lover
Senior Member
***

Reputation Power: 2 
srivatsa has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 239
Join Date: Aug, 2011



If i have understood correctly. I don't think the frequency really matters, its the duty cycle of the pulses you send which makes the esc move.
Logged
 

Read
« Reply #9 on: November 04, 2012, 12:10:06 PM »
KALYANPRODHAN
Global Moderator
Forum Hero

*****

Reputation Power: 17 
KALYANPRODHAN has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Intermediate
Posts: 1584
Join Date: Jul, 2010

Information sharing improves knowledge of both.



Who tell that frequency does not matters ?

Frequency matters as after LPF, 10 pulse time required to response the error signal. So higher the frequency, faster be the response.

Moreover, with High frequency, the LPF (Low Pass Filter) circuit weight become less (for low L & C value required to achieve same dB/Dec) and circuit weight minimizes.
Again, jerk reduces (or smooths) at the motor.

Drawbacks of higher frequency switchings are.
1. Higher speed MOS switch, and free wheeling diode required (+you get low loss, -Price is high)
2. High frequency noise disturbs RF Communication. So, good filters in power line required.

So, a trade off is always done while selecting the switching frequency. So, better go for a tested circuit. While replacing any part, try to select the most nearest available one.

Thanks
Logged

We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
im a mere bigginner to RC and i really wish to make a quadcopter under 10000Rs .
Multirotors
rohit1d 6 2441 Last post March 31, 2016, 04:53:46 PM
by K K Iyer
How to make an Inexpensive Control Rod
Electric Planes
vivek.shome 1 2955 Last post June 22, 2017, 01:14:35 PM
by Sbach342
Need help in pcb make
Beginners Zone
taksh 0 1370 Last post January 12, 2018, 10:57:12 PM
by taksh
What should I make??
Electric Planes
Mehul Anand 1 1879 Last post March 11, 2018, 10:54:58 AM
by prabal276
Should I make ft 3d??
Chatter Zone
Mehul Anand 0 851 Last post July 13, 2018, 07:13:35 AM
by Mehul Anand