3-D printing.

Started by parichya.gautam, February 11, 2015, 11:11:23 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

parichya.gautam

Need some info on this, Anyone who has experience with it ?

I am planning to get one , but need to know the basic before i get in .

Anyone ? :)
Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

xxkrishxx

Planning to get a 3d printer??
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

parichya.gautam

yup, if things go right ...
Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

parichya.gautam

so ? you know this stuff ?
Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

parichya.gautam

http://www.3ding.in/

the FabX model is what I have my eyes on .
Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

xxkrishxx

I'm searching in Internet to know if one can be built from scratch  ;D
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

sahilkit

wow 3d printer for 20k, i was planning to buy one.
Today might be a great and wonderful day. It depends on you.

sahilkit

even i was planning for a DIY unit but as days go by there seems not much difference in price.
Today might be a great and wonderful day. It depends on you.

xxkrishxx

Google white ant 3d printer
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

parichya.gautam

yea :D thats why i needed to know more about it , what type of stuff is used, recurring costs , where can i get the designs from etc ..
Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

Nithinraj Kotian

My Friend has one. We started Building Quadcopter Frames. :hatsoff:

Life is Simple Don't Make it Complicated

Nithinraj Kotian

some more pics.
Life is Simple Don't Make it Complicated

Nithinraj Kotian

 350 size folding frame.
Life is Simple Don't Make it Complicated

parichya.gautam

wow ! , how does it cost ??

making the frames ??

also what was the cost of the printer ?
Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

sahilkit

Today might be a great and wonderful day. It depends on you.

Nithinraj Kotian

he spent around 40K for the machine.

Frame costs around Rs.300 to 500 depends upon the size.   :hatsoff:
Life is Simple Don't Make it Complicated

Himadri Roy

Parichya sir if your buying a 3d printer go for the prusa i3 get the electronics and mechanical kit from ebay,banggood or aliexpress and you can laser cut the prusa i3 frame from 6mm MDF wood.....if you search well you could get your 3D printer ready in 12K!.....Even i am planing to do the same after my exams are over :banghead: :banghead: ....and you could get ABS filament from HK at 9$! :hatsoff:
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

parichya.gautam

Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

Himadri Roy

You could reduce more 2k if you make the control board on your own(DIY stuff)
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

sooraj.palakkad

Arun.sreelakam in our forum has already made a low cost DIY-3D printer .

@Parichya, you can contact Mr. Arun for more details on this , (This is the same guy from whom you are buying that LED kit !!)
RC Hobbyist and an Aerial Cinematographer..

parichya.gautam

Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

arun.sreelakam

Have my own homebuilt 3d printer..
Started printing many stuffs like control horns
Motor mounts etc..
Fully homemade..
Need to improve a lot.. still i am happy with the results...
https://m.facebook.com/story.php?story_fbid=1030010260349498&id=100000216016561&refid=8&_ft_=qid.6109775911932633474%3Amf_story_key.-1575699689291819531&__tn__=%2As
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

Himadri Roy

Sir was delta easier to build than the normal style?
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

xxkrishxx

How much u spent for this?
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

arun.sreelakam

I found delta is much easier to diy.. most of the parts i had already..
Frame is mdf cnc cuted
Steel rods
Bearings and belts all purchaed thats it
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

satyagupta

Quote from: Nithinraj Kotian on February 11, 2015, 11:54:51 AM
My Friend has one. We started Building Quadcopter Frames. :hatsoff:

How much time does it takes to make a 360 size frame (from start to end)
one stop for multirotor needs:
www.quadkopters.com

http://www.facebook.com/QuadKopters
https://www.youtube.com/user/QuadKopters
https://www.instagram.com/quadkopters

Avadhut10001

3D printers to print frame 360 size and arm in just 10-20hour  :giggle:
Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service

arun.sreelakam

Quote from: Avadhut10001 on February 11, 2015, 08:52:00 PM
3D printers to print frame 360 size and arm in just 10-20hour  :giggle:
Today printed a 250mm quad frame
With 5mm thich center plate and 9mm thich arms with 60mm high landing skid..
Whole peint took aeound 6 hours in total..
And around 65mtrs of pla
Total weight around 50gms..
Moderately strong.. will post the pics and flying video soon..;D
As it is a diy printer the finishing is not that perfect.. and took a lot of time coz i just printed in a speed of 35mm/sec
Where we can actually go up to 150mm/sec.
I
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

Himadri Roy

Sir ABS would have been stronger i guess than PLA :headscratch:...anyway waiting for your pics on the print! :hatsoff:
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

Nithinraj Kotian

#29
Quote from: satyagupta on February 11, 2015, 04:09:55 PM
How much time does it takes to make a 360 size frame (from start to end)

Satya sir, it would take 5-6hrs for 350mm size Quad. weight will be around 70-100grams.
Life is Simple Don't Make it Complicated

satyagupta

What would be the thickness of that frame?
one stop for multirotor needs:
www.quadkopters.com

http://www.facebook.com/QuadKopters
https://www.youtube.com/user/QuadKopters
https://www.instagram.com/quadkopters

Nithinraj Kotian

Center plate 3mm and arm 6 to 10mm  :hatsoff:
Life is Simple Don't Make it Complicated

satyagupta

Good stuff thanks for the info.
one stop for multirotor needs:
www.quadkopters.com

http://www.facebook.com/QuadKopters
https://www.youtube.com/user/QuadKopters
https://www.instagram.com/quadkopters

Nithinraj Kotian

Life is Simple Don't Make it Complicated

teamnamibia

I have experience with the REPRAP prusa mendel i2, you could get a Prusa i3?
forever indebted to this community. :-) currently in Namibia, let me know if you guys want to come over!

zippys123

Hello Gautam,

Please check out Creatorbot DIY 3D Printer KIT http://creatorbot.com/machines-and-accessories/3d-printers/creatorbot-mini with a price tag of 28,500/-. if any questions happy to answer it.


Cheers,
Varun


parichya.gautam

intersting ... is it all inclusive ? Like no need to get X or Y on your own ..
Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

arun.sreelakam

Here are some of my prints and the 3d delta design..
getting speeds upto 75mm/sec
And 0.4mm nozzle with .4mm layer thikness..
working with cura and coding source ultimaker modified..
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

arun.sreelakam

Some more
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

parichya.gautam

Passion > Financial Constraints

To Contact:
FB: https://www.facebook.com/parichya
Mob: 8375066843
Mail:
-------------------------------------------------------
My Products On Sale Catalogue: ( !!! LOWEST PRICE GUARANTEE ON ALL ITEMS !!! ) https://app.box.com/s/84m5t5ljrwat54rmrldjg74dtie28g44
-------------------------------------
Product Request Form: https://docs.google.com/forms/d/1-OccRCaAQux8hxpuTw_xI4k3Ll9QW9JyOr0XDijzPXA/viewform?us

arun.sreelakam

The specs looks good..
150x150x150mm build area is okay but not suffice.. i dont think its with a heat bed.. no more specs given
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

zippys123

Hello Arun and gautham,

Yes the build volume is small but adequate and its meant for starters in 3d printing.


its only PLA as of now so no heated bed but it comes with a Aluminum Bed so can be upgraded later.

its expandable, if you know how to work on it, you can make a 1m x 1m x 1m printer too  ;D.

we have these rails http://creatorbot.com/frame-rails/t-slot-profiles and can get some ideas here openbuilds.com

I really want to see how these rails we have can be used in RC Hobby to make some cool awesome stuff.


arun.sreelakam

Ofcourse you can built any size printer.. but what i am taking was under budget..
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

shreeyak

Hey, I've been working with a company that makes 3D printers. The guys are from made a lot of noise good their quality of print. Check them out:
Fractal Works

sahilkit

Today might be a great and wonderful day. It depends on you.

xxkrishxx

is this kinda Aluminum extrusions available at Bangalore??

:hatsoff:
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

Himadri Roy

They should be available at local aluminium shops...they are called t-slots!
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

xxkrishxx

there is an online shop but shipping is costly

http://www.3dprintronics.com/aluminum-extrusions/v-slot#!/V-Slot-Aluminium-Extrusion-20-x-40-1-m/p/44631147/category=12115347
BalaKrishnan
Mechanical engineer..

Radio:Spektrum Dx6i | Futaba 6EXP | working on coro Avispad | HK450MT kit | Seagull Boomerang 40 | HK 250GT | Upcoming: Easy Star 2 |

zippys123

Hello Krish, we sell V-Slots and accessories for it.

we are based out of Bangalore, you can come down and pick it up too.

http://creatorbot.com/frame-rails/rails


Regards,
Varun

MohitJindal

Everyone says that they have the best 3D printer in India ? How we can judge, which is the best ?

3dtech

Whole peint took aeound 6 hours in total..
And around 65mtrs of pla
Total weight around 50gms..

3d printing service Ahmedabad india

Power_user_EX

Quote from: parichya.gautam on February 11, 2015, 11:11:23 AM
Need some info on this, Anyone who has experience with it ?

I am planning to get one , but need to know the basic before i get in .

Anyone ? :)

Have been making DIY CNCs and 3d-printers since 2013. Currently into making 3d-printers & mini-CNCs for hobbyists. Feel free to ask for any help regarding that. Will post a few pics in some time.

fabforma

Hi,
Certainly not advisable to make frames with PLA. It is brittle and prone to cracking. ABS is a better option for the same budget. However, Nylon and PETG are the best 3d printing materials for quadcopter parts. You can go through our list of materials on www.fabforma.com. We have a wide range of materials for various applications. If you want your custom parts designed & prototyped quickly, please feel free to call us / email us anytime. Happy to help.

Regards,
Fabforma Team
www.fabforma.com

Power_user_EX

Here is a video of 2nd Version of our 3DPrinter :