RC India

RC Equipments => Tools, Materials and Building Techniques => Topic started by: KALYANPRODHAN on February 08, 2011, 06:58:26 PM



Title: Balsa/Wood cutting Laser
Post by: KALYANPRODHAN on February 08, 2011, 06:58:26 PM
Does any one have experience the cutting Balsa/wood by Laser ?

If yes, then where from the LASER came or how it was made? What about the cutting BED or masking system if used? Or the plotter with head with LASER.

This can save a LOT of time.

Thanks


Title: Re: Balsa/Wood cutting Laser
Post by: ujjwaana on February 08, 2011, 07:08:28 PM
You fellow Kolkata flyer get laser cutting done locally:
http://www.rcindia.org/wanted/model-aircraft-plywood/

I had some success in  Bangalore:
http://www.rcindia.org/tools-materials-and-building-techniques/laser-cnc-cutting-service-in-bangalore-for-cutting-balsa/


Cutting Balsa/Ply with laser requires what is called Co2 (Gas) laser head of 30-100+Watts, mounted on a CNC machine. Commercial CNC Laser cost over 10 Lacks to import.

http://www.rcindia.org/tools-materials-and-building-techniques/balsa-laser-cutter/


I was planning to build a LED based (1Watt) laser cutter for cutting foam but abandoned the plan for the while as cutting Depron with Hobby knife is much convenient than cutting Balsa:
http://www.rcindia.org/tools-materials-and-building-techniques/balsa-laser-cutter/



Title: Re: Balsa/Wood cutting Laser
Post by: prabu85 on December 14, 2016, 07:07:55 PM
nanomarkers@gmail.com, I have personally tried for laser cut service, They undertake all type of Laser  cutting, engraving works on balsa & pine wood sheets
Address: Sudharsan Nagar, Sriramapuram, Srirangam, Tiruchirappalli, Tamil Nadu 620006
Phone: 091500 53500

Rs 10 /min.


Title: Re: Balsa/Wood cutting Laser
Post by: KALYANPRODHAN on December 15, 2016, 01:51:19 AM
Sir, There are shops/ services everywhere who cuts for payments. But if anyone, who done it by himself, can enlighten us, we will be gratefull. This is just like (rather much easier than) diy 3d printer.


Title: Re: Balsa/Wood cutting Laser
Post by: karyadasarutama on September 22, 2017, 11:26:56 AM
if you want be dealer for balsa wood maybe you can contact www.karyadasarutama.com direct to factory for get good price