|
Title: control surfaces, control horns and clevises Post by: rcrcnitesh on August 06, 2013, 02:56:59 PM which one of these is better
1. control horns vs. ice cream sticks vs. any other home made alternative 2. hinges vs. glue vs. any other home made alternative 3. clevises vs. linkage stoppers vs. z bends vs. any other home made alternative if i have posted it in the wrong place please correct it make it a sticky thread if you think its good enough Title: Re: control surfaces, control horns and clevises Post by: aniket210696 on August 06, 2013, 06:00:19 PM dude... please research on your own! google it, youtube it, i have asked the same questions, and have found the answers through google!!!
purpose built equipment is the best. linkage stoppers are the best if your pushrods are flexible. otherwise clevices... sme goes for hinges, though you can use xray film or something else that doesnt tear easily... Title: Re: control surfaces, control horns and clevises Post by: rcrcnitesh on August 09, 2013, 01:50:44 PM bump
bump bump Infinite bump Title: Re: Re: control surfaces, control horns and clevises Post by: sanjayrai55 on August 09, 2013, 02:29:32 PM This member is ridiculous. Can't he do a search on the forum? On google?
Everyone wants to encourage a newcomer, but show some initiative of your own please Sent from my GT-S7562 using Tapatalk 2 Title: Re: Re: control surfaces, control horns and clevises Post by: aniket210696 on August 09, 2013, 03:10:04 PM nitesh please research yourself ... we can't keep spoonfeeding you! your constantly asking the same questions that have already been answered thousand times before!
do some research before asking... Sent from a potato using a lamp Title: Re: control surfaces, control horns and clevises Post by: rastsaurabh on August 09, 2013, 05:30:28 PM dear rcrcnitesh,
Start making your model .... many questions you would be able to answer yourself. even if you try in scratch building you cannot / will not be able to get 100% correct the very first time. |