RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: March 04, 2014, 03:17:55 PM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014




Hello RC-India,

I was just an avid lurker here on forums since my childhood, but the cost of RC at that time made a no-no option for me.

now i am having an Start-up based out of Bangalore with big goals Thumbs Up to make a set of desktop fabrication tools for Makers.

Developing an low cost DIY CNC Router with below planned specifications-

  • Footprint - 540mm x 510mm
  • Cutting area - 300mm x 300mm x 54mm
  • Nema - 17/23 Stepper Motor
  • Stepper driver - Custom Designed Open-source Stepper driver (1/16) (1/32)
  • Starter Spindle choice is Dremel clone
  • Steel and Aluminum Profile design

The design can also be Expanded into 1000mm x 1000mm

and it will be Open-Source Design so all are welcomed to give your suggestions.
(The said above machine is getting ready for prototyping will post images once its ready)
Logged
 

Read
« Reply #1 on: March 04, 2014, 09:34:34 PM »
lastRites
Lover of all RC
Plane Lover
Forum Hero

*****

Reputation Power: 10 
lastRites has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Beginner
Posts: 753
Join Date: Nov, 2011



Always great to see open source hardware! Best of luck!!
Logged

It is the pervading law of all things organic and inorganic,
Of all things physical and metaphysical,
Of all things human and all things super-human,
Of all true manifestations of the head,
Of the heart, of the soul,
That the life is recognizable in its expression,
That form ever follows function. This is the law.
 

Read
« Reply #2 on: August 25, 2014, 11:51:56 AM »
udnan
Plane Lover
Active Member
**

Reputation Power: 1 
udnan has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 1
Join Date: Aug, 2014



What is the current status of the project.
Logged
 

Read
« Reply #3 on: October 24, 2014, 12:03:01 PM »
Trchmuffins
Techmuffins
Plane Lover
Active Member
**

Reputation Power: 1 
Trchmuffins has no influence.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 45
Join Date: Aug, 2014



Hi zippy's

Best of luck on your project,  how is your project taking place
Like to know where you sourcing Nema stepper motors and
I suggest go in for several open source driver already available
in market which was tried and tested and bug free .

Since you developing this project for commercial use, you
can focus your time on other things .

Also love to know about the aluminium profiles you are planning
to incorporate .

Are you planning to use solid aluminium or profiles

All the best
Logged
 

Read
« Reply #4 on: November 12, 2014, 12:53:10 AM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



Hello Udnan,

sorry for long silence, have been working on a DIY opensource 3D Printer

www.creatorbot.com

the CNC is almost ready but under heavy testing past 6o days. will post more details also soon.

Cheers,
Varun
Logged
 

Read
« Reply #5 on: November 12, 2014, 01:05:06 AM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



Hello Trchmuffins,

thanks for your kind words. the controller is based on opensource GRBL firmware and have seen and used many commercial versions but the cost was a issue.

and we have a small team working on free software for using with CNC so the hardware should even work with software.

Does CNC has any uses for Aero Modelling? have been trying to find use cases.

*Nema Motors are custom made high quality Nema 17 and 23
* the Aluminum profiles are again made in India by us  for example check out a 3D printer designed by us using it. its called as V-Slot.
www.creatorbot.com


much details will post here may be a picture too. :-)

Cheers,
Varun


Logged
 

Read
« Reply #6 on: November 12, 2014, 01:09:53 AM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



here is a pic of a prototype.

IMG_20141022_194910.jpg
Re: DIY CNC Router Kit - Need your suggestions to design it.
* IMG_20141022_194910.jpg (92.2 KB, 800x600 - viewed 1775 times.)
Logged
 

Read
« Reply #7 on: November 12, 2014, 10:57:43 AM »
lastRites
Lover of all RC
Plane Lover
Forum Hero

*****

Reputation Power: 10 
lastRites has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Beginner
Posts: 753
Join Date: Nov, 2011



 Drool
Logged

It is the pervading law of all things organic and inorganic,
Of all things physical and metaphysical,
Of all things human and all things super-human,
Of all true manifestations of the head,
Of the heart, of the soul,
That the life is recognizable in its expression,
That form ever follows function. This is the law.
 

Read
« Reply #8 on: November 12, 2014, 04:26:34 PM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2140
Join Date: Jul, 2013



what is the expected price.
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #9 on: November 13, 2014, 11:23:51 AM »
Avadhut10001
Plane Lover
Senior Member

***

Reputation Power: 2 
Avadhut10001 has no influence.
Offline Offline

City: Karad /Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 152
Join Date: Mar, 2011



Shapeoko 2  ??
Logged

Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service
 

Read
« Reply #10 on: November 13, 2014, 01:44:24 PM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2140
Join Date: Jul, 2013



It's already available at 3dprintronics.
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #11 on: January 02, 2015, 12:32:16 PM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



Hello Avadhut10001, this is based on OpenBuilds and not Makerslide. design is smiler to Shapeoko 2.
 
Logged
 

Read
« Reply #12 on: January 02, 2015, 12:36:50 PM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



Hello rcrcnitesh, Yup the Shapeoko is available from 3dprintronics. but this is based on Openbuilds and designed from scratch and produced right here in Bangalore.

Still lots of testing going on the prototype. attached pic of the same :-)

taxr2f9e5gop3nmiDSC_0007_e.jpg
Re: DIY CNC Router Kit - Need your suggestions to design it.
* taxr2f9e5gop3nmiDSC_0007_e.jpg (48.44 KB, 800x532 - viewed 1259 times.)
Logged
 

Read
« Reply #13 on: January 02, 2015, 12:44:44 PM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2140
Join Date: Jul, 2013



no mr. zippy that message was to avadhut
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #14 on: January 02, 2015, 12:47:28 PM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



oh no probs  Grin
Logged
 

Read
« Reply #15 on: January 02, 2015, 12:53:12 PM »
sundaram
FAN OF FPV FLYING, AERIAL PHOTOGRAPHY & MICRO RC
Plane Lover
Forum Hero

*****

Reputation Power: 38 
sundaram is working their way up.sundaram is working their way up.sundaram is working their way up.
Offline Offline

City: Lucknow
State: Uttar Pradesh
RC Skills: Advanced
Posts: 3366
Join Date: Nov, 2009



Design based on Shapeoko is a sturdy one. I had almost decided to buy one.

Performance of yours and comparable cost factor is to be seen.

Subscribed.  Thumbs Up
Logged

 

Read
« Reply #16 on: January 02, 2015, 01:35:26 PM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



Hello sundaram,

Thanks for subscribing  Smiley , the price is not yet decided but it may be around 39-40k in kitform. it comes with a dremel clone kit and many more features. little busy on our 3d-printer launch, will post more details soon.

some more images in meantime.

DSC_0010.jpg
Re: DIY CNC Router Kit - Need your suggestions to design it.
* DSC_0010.jpg (40.62 KB, 800x532 - viewed 3760 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #17 on: January 08, 2015, 12:19:08 PM »
zippys123
Plane Lover
Active Member
**

Reputation Power: 1 
zippys123 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 14
Join Date: Mar, 2014



Hello Guys i am bringing our CNC prototype to Makerfest if any one is joining please come by to have a glimpse of the CNC.

http://www.makerfest.com/
Logged
 

Read
« Reply #18 on: January 06, 2018, 09:02:07 PM »
s.k.ratnaparkhi
Plane Lover
Active Member
**

Reputation Power: 1 
s.k.ratnaparkhi has no influence.
Offline Offline

City: Dombivali (east)
State: Maharashtra
RC Skills: Beginner
Posts: 29
Join Date: May, 2013



Hi All.
For any Advice .assistance or purchase of any type of cnc machines and software's. Feel free to contact me on 9422177915 or 8779630172.
I have designed  and build many types of cnc machines such as routers ,foam-cutters. ceramic extruders, stone-granite glass engravers and other non conventional type of machines. 
Logged
 

Read
« Reply #19 on: January 13, 2018, 02:40:42 AM »
taksh
Plane Lover
Senior Member
***

Reputation Power: 3 
taksh has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Beginner
Posts: 187
Join Date: Nov, 2017



I Contacted s.k.ratna. when i said that i am not purchasing cnc i am just collecting information of cnc. s.k.ratna cancelled my call. it's my another bad call with stranger
Logged
 

Pages: [1]   Go Up
Jump to: