|
Title: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 15, 2018, 06:52:48 PM Posting after a long time. Flooded flying field, gimbal broken flysky fsi6 radio, uncompleted 4+ models, no time to repair all of them has kept me from flying for almost a year. Though of investing the indoor time to do something useful and voila! its a diy radio.
Got a futaba FM radio from a good friend of mine in dead condition. gutted out all the wires and old board leaving out the Gimbal and outer box and antenna. After lingering around multiple websites for a multi channel radio communication though nrf module, has successfully completed the Transmitter and receiver section. Now need to work on the trims, reverse and channel locking system soon. Video will be uploaded shortly Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 15, 2018, 06:58:35 PM https://www.youtube.com/watch?v=3ZsPxaFaroY&feature=youtu.be
Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: taksh on May 15, 2018, 07:16:08 PM Posting after a long time. Flooded flying field, gimbal broken flysky fsi6 radio, uncompleted 4+ models, no time to repair all of them has kept me from flying for almost a year. Though of investing the indoor time to do something useful and voila! its a diy radio. Got a futaba FM radio from a good friend of mine in dead condition. gutted out all the wires and old board leaving out the Gimbal and outer box and antenna. After lingering around multiple websites for a multi channel radio communication though nrf module, has successfully completed the Transmitter and receiver section. Now need to work on the trims, reverse and channel locking system soon. Video will be uploaded shortly I already made diy radio with nrf24 and arduino nano and arduino uno but there is many error because of thumb joystick and i need to make changes in code but it will not work perfectly after making changes in code as moving space of joystick is very small. I tried radio for controlling servo. I fixed joystick at constant position but some noise is coming from servo but servo position is not changed. Try to make with arduino thumb joystick module if you can. Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 15, 2018, 08:56:31 PM You mean like the one in PS3 Controller. Yes, i did a breadboard version of this radio before moving the entire project into a existing radio box. and it works. trying to share the images for connection diagram, finished product and code but unable to do so. it logs me out of the forum every time. any idea? unable to add attachment.
Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 15, 2018, 10:06:27 PM Images
https://www.dropbox.com/preview/IMG_20180515_180650.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180648.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180638.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180636.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180627.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180059.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180057.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_175941.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180052.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180016.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180010.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180006.jpg?role=personal Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: taksh on May 15, 2018, 11:11:55 PM Images https://www.dropbox.com/preview/IMG_20180515_180650.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180648.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180638.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180636.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180627.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180059.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180057.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_175941.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180052.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180016.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180010.jpg?role=personal https://www.dropbox.com/preview/IMG_20180515_180006.jpg?role=personal The folder ‘/IMG_20180515_180006.jpg’ doesn’t exist. Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: taksh on May 15, 2018, 11:17:38 PM You mean like the one in PS3 Controller. Yes, i did a breadboard version of this radio before moving the entire project into a existing radio box. and it works. trying to share the images for connection diagram, finished product and code but unable to do so. it logs me out of the forum every time. any idea? unable to add attachment. which website u are using rcindia.org or rcindia.com?When you going to login, don't forget to click on checkbox, so you will be online. If you can't do this via check box option then clear the cookie of your browser then restart your browser then login you just need to open website and there is no need to log in. you can make video from images with some time limit then upload video on youtube and share the link on rcindia website Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: taksh on May 15, 2018, 11:25:44 PM You mean like the one in PS3 Controller. Yes, i did a breadboard version of this radio before moving the entire project into a existing radio box. and it works. trying to share the images for connection diagram, finished product and code but unable to do so. it logs me out of the forum every time. any idea? unable to add attachment. you said, "it works". I know radio working but radio is not working perfectly there is many things to do with codes and software.I suggest you to make tutorial video on nrf24l01 This is how you insert image in your post as well as in comment. (http://s2.electrodragon.com/wp-content/uploads/2012/05/NRF24L01L-Long-Range-Wireless-Module-R2-1.1KM-PASMA-02.jpg) Use [ img ] paste link here [ / img ] just remove spaces from the text and replace "paste link here" with link of the image. Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 16, 2018, 07:09:14 AM Got the problem, my images are 3mb . will share in other dropbox. meanwhile, can you tell me what kind of issue are you facing so that i can help
Title: Re: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 16, 2018, 10:21:50 AM Got the problem, my images are 3mb . will share in other dropbox. meanwhile, can you tell me what kind of issue are you facing so that i can help Some more pics(https://uploads.tapatalk-cdn.com/20180516/85f57c19c0d86138f2067454580a5cb4.jpg)(https://uploads.tapatalk-cdn.com/20180516/e8089d6835163c921352ceda8990a2bc.jpg)(https://uploads.tapatalk-cdn.com/20180516/03355dfad0219200ceaaac85339ec9c8.jpg)(https://uploads.tapatalk-cdn.com/20180516/315ddf8e8f09a314ba6c53ccd824db81.jpg)(https://uploads.tapatalk-cdn.com/20180516/b4005ef18c63f081443e7a55bbc90558.jpg)(https://uploads.tapatalk-cdn.com/20180516/9f24f2ea77bd954c055d9e0eb609dec5.jpg)(https://uploads.tapatalk-cdn.com/20180516/2738085b7a97dda60c2fb8297306006f.jpg) Sent from my ZUK Z1 using Tapatalk Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 16, 2018, 10:56:32 AM https://youtu.be/fE5ZH0X9TMA
https://youtu.be/qB0_j6Pe_Yk Videos Sent from my ZUK Z1 using Tapatalk Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: girishsarwal on May 16, 2018, 12:01:42 PM Great work! Whats the range like?
Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: taksh on May 16, 2018, 03:36:12 PM Got the problem, my images are 3mb . will share in other dropbox. meanwhile, can you tell me what kind of issue are you facing so that i can help I am facing issue that is of sensitivity.With thumb joystick, perform is not good as compare to Gimbal. Second thing is if i want to do different things with my radio(like mix) then i need to modify my arduino code. For aleron, proportionality is the problem and need to modify code again and again. One nrf24 module can act as transmitter or receiver but i want one nrf24 module with both properties of transmitting and receiving for checking voltage. In radio, there is two nrf24 module and i want both nrf24 module to work as transceiver so i can measure voltage. Tutorial is available here: http://randomnerdtutorials.com/nrf24l01-2-4ghz-rf-transceiver-module-with-arduino/ Please Try to solve these problem. Title: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 17, 2018, 11:42:06 AM https://www.youtube.com/watch?v=aztm_8qGVfc&app=desktop
Sent from my ZUK Z1 using Tapatalk Title: Re: Re: DIY RC radio using Arduino and NRF24L01 module Post by: v2 eagle on May 17, 2018, 01:50:43 PM Check this tutorial. Complete and simple
https://www.youtube.com/watch?v=aztm_8qGVfc&app=desktop Sent from my ZUK Z1 using Tapatalk Sent from my ZUK Z1 using Tapatalk |