hello every one , i just start this topic to spread my idea of making 1.5 hex driver at very minimum cost, as i was learn lots from this forum and from you all respected members ,
so when i got an idea to make cheap but very strong 1.5 hex driver in my mind ,i just want to spread it through our forum ,so that every one has to take benefit of this cheap hex driver
note;- it only works on 1.5 to 3 mm allen keys .
items require ;-
1. allen key set
[only tapariya ,it is very toughest ] cost around 180 to 200rs.( if dont want to buy set than also there i found option in market for single tapariya allen key in very cheap cost, approx 7 to 10 rs for 1.5 size allen key single one .
2.
double sided mini drill brass chunk (i post snaps ,plz watch .)it is easily available at ebay.in ,cost is from 200 rs to 300rs only depends on seller you search .
now just do straight you allen key deform its "L" shape to straight "l" shape
put it in the drill chunk .
{for refference just watch snaps i attached }thats it .
thank you all for reading ,hope this idea will help every one who need cheap 1.5 hex driver ,have a nice day .